Ryobi JG001 Manuel d'utilisateur télécharger pdf (Page 7)

7 — English

OPERATION

WARNING:

Do not allow familiarity with tools to make you careless.

Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes resulting in possible

serious injury.

WARNING:

Do not use any attachments or accessories not

recommended by the manufacturer of this tool. The use

of attachments or accessories not recommended can

result in serious personal injury.

APPLICATIONS

You may use this tool for the following purpose:

Hammering nails into all types of wood, wood-like

materials, and plaster board.

BATTERY PROTECTION FEATURES

Ryobi lithium-ion batteries are designed with features that

protect the lithium-ion cells and maximize battery life.

If the tool stops during use, release the trigger to reset and

resume operation. If the tool still does not work, the battery

needs to be recharged.

INSTALLING/REMOVING BATTERY PACK

See Figure 2, page 9.

 Align raised rib inside tool with groove on battery pack.

 Make sure the latches on each side of the battery pack

snap into place and battery pack is secured in tool before

beginning operation.

WARNING:

Always remove battery pack from your tool when you are

assembling parts, making adjustments, cleaning, or when

not in use. Removing battery pack will prevent accidental

starting that could cause serious personal injury.

 Depress the latches on each side of the battery pack to

remove the battery pack from the tool.

WARNING:

Battery products are always in operating condition.

Therefore, you should keep your fingers away from the

trigger when the tool is not in use.

Carrying power tools

with your finger on the switch invites accidents.

LOADING NAILS

See Figure 3, page 9.

 Nails with a head diameter less than 7/16 in. and a length

less than or equal to 3-1/2 in. are recommended for use

with the auto hammer.

 Refer to the Nail Selection Chart below when choosing

nails for your specific application.

 To load a nail, hold the auto hammer firmly by the tool

body, with fingers away from the trigger.

 With the nose of the tool pointed away from you, feed

a nail into the magnetic sleeve. The magnetic sleeve

will hold the nail until you are ready to drive it into the

workpiece.

WARNING:

Keep the tool pointed away from yourself and others

when loading nails. Failure to do so could result in

possible serious personal injury.

WARNING:

Never load nails with the magnetic sleeve depressed.

Doing so could result in possible serious personal

injury.

NAIL SELECTION CHART

Nail Type Size Length Shank Diameter

Bright Common 3d 1.25 in. (31.75 mm) 0.08 in. (2.03 mm)

Finishing 3d 1.25 in. (31.75 mm) 0.07 in. (1.7 mm)

Bright Common 6d 2 in. (50.8 mm) 0.11 in. (2.87 mm)

Finishing 6d 2 in. (50.8 mm) 0.09 in. (2.32 mm)

Bright Common 8d 2.5 in. (63.5 mm) 0.13 in. (3.33 mm)

Finishing 8d 2.5 in. (63.5 mm) 0.1 in. (2.51 mm)

Bright Common 10d 3 in. (76.2 mm) 0.15 in. (3.77 mm)

Finishing 10d 3 in. (76.2 mm) 0.11 in. (2.87 mm)

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi JG001 Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour les appareils électriques Ryobi JG001