Ryobi IR001 Manuel d'utilisateur télécharger pdf

ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 • Phone 1-800-525-2579

États-Unis, Téléphone 1-800-525-2579 • USA, Teléfono 1-800-525-2579

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS.

WARNING:

Use of controls or adjustments or performance

other than those specified herein may result in

hazardous radiation exposure.

nAvoid direct eye exposure when using the laser

and do not project the laser beam directly into

the eyes of others. Serious eye injury could

result.

nDo not operate the laser around children or

allow children to operate the product. Serious

eye injury could result.

nDo not use for medical evaluations or to

measure body temperature. This product is

meant for household use only.

nNever aim the beam at a person or object

other than the target surface.

OPERATOR’S MANUAL

Non-Contact InfraRed

Thermometer IR001

FEATURES

PRODUCT SPECIFICATIONS

Temperature Range:

-4˚F to 600˚F (-20˚C to 315˚C)

Laser Certifications: Class II<1mW, 630-670 Nm

Ambient Operating

Temperature Range: 32˚F to 122˚F (0˚C to 50˚C)

OPERATION

MAINTENANCE

GENERAL SAFETY RULES

Fig. 1

APPLICATIONS

nDetects hot/cold spots in door and window

seals to help pinpoint draft areas or leakage of

warm or cool air

nCheck the temperature of air vents

nCheck the exterior/interior surfaces of house-

hold items and appliances

nAutomotive applications

INSTALLING THE BATTERY

See Figure 2.

A 9 Volt battery (included) must be installed

before using the thermometer.

To install the battery:

n

Slide the battery cover down, then up and

remove it from the handle of the thermometer.

n

Attach the battery terminals to their connectors

on the thermometer.

n

Slide the switch inside the handle to select

Fahrenheit or Celsius temperature readings as

shown in figure 2.

n

Close the battery compartment by sliding the

cover into place until it snaps closed.

TAKING TEMPERATURE READINGS

See Figure 3.

For the most accurate readings, follow these hints:

OPERATION

Fig. 3

Fig. 2

NOTE: Temperature readings can only be

measured on a target surface.

n

Place the unit less than two (2) feet from the

item you wish to read.

n

Accuracy of readings is plus ( + ) or minus ( - )

5°C of the actual temperature, assuming

ambient temperature of 25 + / - 1ºC.

n

Readings at distances greater than two (2)

feet may be less accurate due to external

light sources, surrounding air temperature and

reading of larger surface areas not intended to

be measured.

n

Cleaner surfaces will give more accurate

readings.

n

Allow 10-15 minutes to adjust to extreme

temperature changes when testing an item or

area out of the operating range 32˚F - 122˚F

(0˚C - 50˚C).

SPOT READINGS

NOTE: The laser beam will remain on as long as

the trigger is depressed.

n

Aim at the target item or surface.

n

Pull and release the trigger once.

n

The target temperature reading is displayed on

the screen for approximately 7 seconds after

the trigger is pulled.

CONTINUOUS READINGS

n

Aim at one location. Pull and hold the trigger.

Move the laser beam over another location.

n

The temperature will be displayed and will

change when the target object changes.

n

The maximum temperature read will also be

displayed.

n

The target temperature reading is displayed

on the screen for approximately seven (7) sec-

onds after the trigger is released.

Do not immerse the product in water. Clean only

the exterior using a damp cloth.

To ensure accurate readings, the battery should

be replaced when the battery indicator shows a

low battery.

To receive a replacement product, you must

present proof of purchase and return all original

equipment packaged with the original product.

The replacement product will be covered by the

limited warranty for the balance of the two year

period from the date of the original purchase.

1 LASER BEAM FAISCEAU LASER RAYO LÁSER 8 BATTERY COVER

COUVERCLE DU COMPARTIMENT

DE LA BATTERIE

CUBIERTA DE LA BATERÍA

MEASURING

BEAM

FAISCEAU DE MESURE RAYO MEDIDOR 9

BATTERY

COMPARTMENT

COMPARTIMENT DE LA BATTERIE

COMPARTIMIENTO DE

LA BATERÍA

3 TRIGGER GÂCHETTE GATILLO 10 LASER INDICATOR INDICATEUR LASER INDICADOR LÁSER

4 LCD DISPLAY AFFICHEUR ACL

PANTALLA DE CRISTAL

LÍQUIDO

BATTERY

INDICATOR

INDICATEUR DE NIVEAU DE

CHARGE

INDICADOR DE BATERÍA

BATTERY

COMPARTMENT

COMPARTIMENT DE LA

BATTERIE

COMPARTIMIENTO DE

LA BATERÍA

MAXIMUM

TEMPERATURE

TEMPÉRATURE MAXIMUM TEMPERATURA MÁXIMA

6 C° / F° SELECTOR

SÉLECTEUR CELSIUS°/

FARENHEIT°

SELECTOR DE GRADO

CELSIUS O FARENHEIT

13 C° / F° C° / F° C° / F°

7 9 VOLT BATTERY BATTERIE DE 9 VOLT BATERÍA DE 9 V 14

CURRENT

TEMPERATURE

TEMPÉRATURE ACTUELLE TEMPERATURA ACTUAL

nDo not use this product as a precision

thermometer.

nAvoid exposing the unit to shock, continuous

vibration, or extreme hot or cold temperatures.

Damage to the product and/or serious injury to

the user could result.

n Save these instructions. Refer to them frequently

and use them to instruct others who may use this

product. If you loan someone this product, loan

them these instructions also to prevent misuse of

the product and possible injury.

GENERAL SAFETY RULES

1 2

Résumé du contenu

Page 1 - OPERATOR’S MANUAL

ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 • Phone 1-800-525-2579 États-Unis, Téléphone 1-800-525-2579 • USA, Teléfono

Page 2 - MANUAL DEL OPERADOR

987000-44109-22-08 (REV:03)APPLICATIONSnDétecter les points chauds ou froids dans les joints d’étanchéité des portes et fenêtres pour localiser le

Commentaires sur ces manuels

Pas de commentaire

Ryobi IR001 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour la vidéo Ryobi IR001. Ryobi IR001 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour la vidéo Ryobi IR001