Ryobi YG601PV1 Manuel d'utilisation et d'entretien télécharger pdf (Page 5)

5 – English

Check damaged parts. Before further use of the air

compressor or air tool, a guard or other part that is

damaged should be carefully checked to determine

that it will operate properly and perform its intended

function. Check for alignment of moving parts, binding

of moving parts, breakage of parts, mounting, and

any other conditions that may affect its operation. A

guard or other part that is damaged should be properly

repaired or replaced by an authorized service center.

Following this rule will reduce the risk of shock, fire, or

serious injury.

Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one

heavy enough to carry the current your product will

draw. A wire gauge size (A.W.G.) of at least 14 is

recommended for an extension cord 25 feet or less in

length. A cord exceeding 50 feet is not recommended.

If in doubt, use the next heavier gauge. The smaller

the gauge number, the heavier the cord. An undersized

cord will cause a drop in line voltage resulting in loss of

power and overheating.

This equipment incorporates parts, such as snap

switches, receptacles, and the like that tend to pro-

duce arcs or sparks and, therefore, when located in a

garage, it should be in a room or enclosure provided for

the purpose, or should be 18 in. (457 mm) or more above

the floor.

Never store a tool with air connected. Storing the tool

with air connected can result in unexpected firing and

possible serious personal injury.

Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule will reduce the risk

of serious personal injury.

 If the power supply cord is damaged, it must be replaced

only by the manufacturer or by an authorized service

center to avoid risk.

Save these instructions. Refer to them frequently and use

them to instruct others who may use this product. If you

loan someone this product, loan them these instructions

also.

SPECIFIC SAFETY RULES

1 2 3 4 5 6 7 8 9 10 ... 17 18

Pas de commentaire

Ryobi YG601PV1 Manuel d'utilisation et d'entretien Page 5