Ryobi P241 Manuel de l'opérateur télécharger pdf (Page 11)

11 – English

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts.

Use of any other parts could create a hazard or cause

product damage.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes, resulting in possible

serious injury.

WARNING:

To avoid serious personal injury, always remove the

battery pack from the product when cleaning or perform-

ing any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use. Use

clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken or

destroy plastic which can result in serious personal injury.

BATTERY PACK REMOVAL AND PREPARATION

FOR RECYCLING

WARNING:

Upon removal, cover the battery pack’s terminals with

heavy-duty adhesive tape. Do not attempt to destroy or

disassemble battery pack or remove any of its compo-

nents. Lithium-ion and nickel-cadmium batteries must

be recycled or disposed of properly. Also, never touch

both terminals with metal objects and/or body parts as

short circuit may result. Keep away from children. Failure

to comply with these warnings could result in fire and/

or serious injury.

CHUCK REMOVAL

See Figures 7 - 9, page 13.

To remove the chuck:

Lock the switch trigger by placing the direction of rotation

selector in center position.

Insert a 5/16 in. or larger hex key into the chuck of the

drill and tighten the chuck jaws securely.

Tap the hex key sharply with a mallet in a clockwise di-

rection. This will loosen the screw in the chuck for easy

removal.

Open the chuck jaws and remove the hex key. Remove

the chuck screw by turning it in a clockwise direction.

NOTE: The screw has left hand threads.

Insert the hex key in chuck and tighten the chuck jaws

securely. Tap sharply with a mallet in a counterclockwise

direction. This will loosen the chuck on the spindle. It can

now be unscrewed by hand.

TO RETIGHTEN A LOOSE CHUCK

See Figure 9, page 13.

The chuck may become loose on the spindle and develop

a wobble. Periodically check the chuck screw for tightness.

Lock the switch trigger by placing the direction of rotation

selector in center position.

 Open the chuck jaws.

Insert the hex key into the chuck and tighten the chuck

jaws securely. Tap the hex key sharply with a mallet in

a clockwise direction. This will tighten the chuck on the

spindle.

Open the chuck jaws and remove the hex key.

Tighten the chuck screw.

NOTE: The chuck screw has left hand threads.

NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 12

AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Ryobi P241 Manuel de l'opérateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Chargeurs de batterie Ryobi P241