Ryobi 232RD Manuel de l'opérateur Page 11

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 37
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 10
English – 11
SAFETY INSTRUCTIONS
General safety instructions
IMPORTANT INFORMATION
The machine is only designed for trimming grass,
brush cutting and/or forestry clearing.
The only accessories to be used with the engine
unit as a drive source are the cutting units we
recommend in the chapter
“Technical data“
.
Never use the machine if you are tired, if you have
consumed alcohol, or if you are taking medicines
that can affect your sight, your judgement or the
control of your body.
Use personal protective equipment. See the
section
“Personal protective equipment“.
Never use a machine that has been modified so
that it no longer corresponds with the original
design.
Never use a machine that is faulty. Follow the
maintenance, control and service instructions in
this Operator‘s Manual. Some maintenance and
service actions should be carried out by trained
and qualified specialists. See the chapter
“Mainte-
nance“
.
The machine operator shall ensure, while working,
that no persons or animals come closer than 15
metres (50 feet). When several operators are
working in the same area the safety distance
should be at least double tree length, however, at
least 15 metres (50 feet).
WARNING!
Faulty cutting equipment or an incorrectly
sharpened blade increases the risk of
accidents.
!
Start
!
WARNING!
When the engine starts with the choke lever
in the choke or starter throttle position the
cutting equipment starts to rotate
immediately.
The complete clutch cover
with shaft must be fitted
before the machine is
started, otherwise the
clutch can become loose
and cause personal injury.
Never start the machine
indoors. Bear in mind the
dangers of inhaling the
engine‘s exhaust fumes.
Observe your surroundings
and make sure that there is
no risk of people or
animals coming into
contact with the cutting
equipment.
Place the machine on the ground, ensure the cutting
equipment runs free of twigs and stones. Push the machine
body towards the ground using your left hand. (NOTE! Not
with your foot). Grip the starter handle with your right hand
and pull the starter cord.
Fuel safety
Never fill the machine
while the engine is
running. Always stop the
engine and let it cool for a
few minutes before
refuelling.
Provide good ventilation
when filling or mixing fuel
(petrol and 2-stroke oil).
Move the machine at least
3 m from the filling
position before starting.
Never start the machine:
a)If you have spilt fuel on it.
Wipe up all spillage.
b)If you have spilt fuel on
yourself or your clothes.
Change your clothes.
c)If there is a fuel leak.
Make regular checks for
leakage from the fuel cap
and the fuel supply pipes.
Min. 3 m
(10 ft)
Transport and storage
Store and transport the machine and fuel so that any leakage
or fumes do not risk coming into contact with sparks or
naked flames. For example, electric machines, electric
motors, electrical switches/power switches, heaters or the
like.
When storing and transporting fuel approved containers
intended for this purpose must be used.
When storing the machine for long periods the fuel tank
must be emptied. Contact your local petrol station to find
out how to dispose of excess fuel.
Always keep the transport guard attached when transporting
and storing the machine.
!
WARNING!
Exercise great care when handling fuel.
Bear in mind the risk of fire, explosions and
inhaling fumes.
Vue de la page 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 36 37

Commentaires sur ces manuels

Pas de commentaire