Ryobi 3000 PSI Manuel d'utilisateur télécharger pdf (Page 4)

SPECIFIC SAFETY RULES

n NEVER DIRECT A WATER STREAM TOWARDS

PEOPLE OR PETS, OR ANY ELECTRICAL

DEVICE.

n BEFORE STARTING ANY CLEANING OPERATION,

close doors and windows. Clear the area to be cleaned

of debris, toys, outdoor furniture, or other objects that

could create a hazard.

n NEVER PICK UP OR CARRY A MACHINE WHILE THE

ENGINE IS RUNNING.

n NEVER START THE MACHINE if ice has formed in

any part of the equipment.

n DO NOT USE ACIDS, ALKALINES, SOLVENTS,

FLAMMABLE MATERIAL, OR INDUSTRIAL GRADE

SOLUTIONS in this product. These products can cause

physical injuries to the operator and irreversible damage

to the machine.

n ALWAYS OPERATE THE MACHINE on a level surface.

If the engine is at an incline, it could seize due to

improper lubrication (even at the maximum oil level).

n WARNING: HIGH PRESSURE JETS CAN BE

DANGEROUS IF SUBJECT TO MISUSE. The jet

must not be directed at persons, animals, electrical

devices, or the machine itself.

n NEVER ATTEMPT TO MAKE ANY ADJUSTMENTS

WHILE THE ENGINE (MOTOR) IS RUNNING (except

where specifically recommended by the manufacturer).

n PROTECTIVE COVERS MUST ALWAYS COVER

ROTATING PARTS WHEN THE E NGINE IS

RUNNING.

n KEEP COOLING AIR INTAKE (recoil starter area) and

muffler side of the engine at least 3 feet away from

buildings, obstructions, and other burnable objects.

n KEEP THE ENGINE AWAY FROM FLAMMABLES AND

OTHER HAZARDOUS MATERIALS.

n KEEP AWAY FROM HOT PARTS. The muffler and other

engine parts become very hot, use caution.

n DO NOT TOUCH THE SPARK PLUG AND IGNITION

CABLE when starting and operating the engine.

n CHECK FUEL HOSES AND JOINTS for looseness

and fuel leakage before each use.

n CHECK BOLTS AND NUTS for looseness before each

use. A loose bolt or nut may cause serious engine

problems.

n ALWAYS REFUEL OUTDOORS. Never refuel indoors or

in a poorly ventilated area.

n NEVER STORE THE MACHINE WITH FUEL IN THE

FUEL TANK INSIDE A BUILDING where ignition sources

are present, such as hot water and space heaters, clothes

dryers, and the like.

n IF THE FUEL TANK HAS TO BE DRAINED, DO THIS

OUTDOORS.

TO REDUCE THE RISK OF FIRE AND BURN INJURY,

handle fuel with care. It is highly flammable.

DO NOT SMOKE WHILE HANDLING FUEL.

n ADD FUEL BEFORE STARTING THE ENGINE. Never

remove the cap of the fuel tank or add fuel while the

engine is running or when the engine is hot.

LOOSEN FUEL CAP SLOWLY to release pressure and

to keep fuel from escaping around the cap.

n REPLACE ALL FUEL TANK AND CONTAINER CAPS

SECURELY.

WIPE SPILLED FUEL FROM THE UNIT. Move 30 feet

away from refueling site before starting engine.

n IF FUEL IS SPILLED, do not attempt to start the engine

but move the machine away from the area of spillage and

avoid creating any source of ignition until fuel vapors have

dissipated.

NEVER ATTEMPT TO BURN OFF SPILLED FUEL

UNDER ANY CIRCUMSTANCES.

BEFORE STORING, ALLOW THE ENGINE TO COOL.

n STORE FUEL IN A COOL, WELL-VENTILATED AREA,

safely away from spark and/or flame-producing equip-

ment.

n STORE FUEL IN CONTAINERS specifically designed for

this purpose.

EMPTY FUEL TANK AND RESTRAIN THE UNIT FROM

MOVING before transporting in a vehicle.

n WHEN SERVICING USE ONLY IDENTICAL RYOBI

REPLACEMENT PARTS. Use of any other parts may

create a hazard or cause product damage.

n USE COLD WATER ONLY.

n MAKE SURE MINIMUM CLEARANCE of 3 feet is main-

tained from combustible materials.

n SAVE THESE INSTRUCTIONS. Refer to them frequently

and use them to instruct other users. If you loan someone

this tool, loan them these instructions also.

1 2 3 4 5 6 7 8 9 ... 25 26

Commentaires sur ces manuels

Pas de commentaire

Ryobi 3000 PSI Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Carwash Ryobi 3000 PSI