Ryobi EWS1150RS Manuel d'utilisateur télécharger pdf (Page 6)

English

FR DE ES IT NL PT DA SV FI NO RU PL CS HU RO LV LT ET HR SL SK EL TR

DESCRIPTION

1. Spindle lock

2. Bevel adjustment lever

3. Edge guide lock screw

4. Base plate

5. Edge guide

6. Lower guard

7. Blade

8. Lower guard lever

9. Upper guard

10. Outer blade ﬂ ange

11. Hex-head bolt

12. Wrench

13. Washer

14. Inner blade ﬂ ange

15. Depth adjustment lever

16. Depth of cut

17. Depth pointer

18. Depth scale

19. Bevel scale

20. Bevel pointer

21. Lock-off trigger

22. Switch

23. Live tool indicator

24. Vacuum adapter

25. 0˚ bevel notch

26. 45° bevel notch

SPECIAL SAFETY RULES

Do not use any abrasive wheels.

DANGER

Keep hands away from cutting area. Keep hands

away from blade. Keep your second hand on

auxiliary handle, or motor housing. If both hands are

holding the saw, they cannot be cut by the blade.

 Do not reach underneath the workpiece. The

guard cannot protect you from the blade below the

workpiece.

 Adjust the cutting depth to the thickness of the

workpiece. Less than a full tooth of the blade teeth

should be visible below the workpiece.

 Never hold piece being cut in your hands or

across your leg. Secure the workpiece to a stable

platform. It is important to support the work properly

to minimize body exposure, blade binding, or loss of

control.

 Hold power tool by insulated gripping surfaces

only, when performing an operation where the

cutting accessory may contact hidden wiring or its

own cord. Contact with a “live" wire will also make

exposed metal parts of the power tool “live" and shock

the operator.

 When ripping always use a rip fence or straight

edge guide. This improves the accuracy of cut and

reduces the chance of blade binding.

 Always use blades with correct size and shape

(diamond versus round) of arbour holes. Blades

that do not match the mounting hardware of the saw

will run eccentrically, causing loss of control. Use only

blades specified in this manual, complying with EN

847-1.

 Never use damaged or incorrect blade washers

or bolt. The blade washers and bolt were specially

designed for your saw, for optimum performance and

safety of operation.

Causes and operator prevention of kickback:

 kickback is a sudden reaction to a pinched, bound

or misaligned saw blade, causing an uncontrolled

saw to lift up and out of the workpiece toward the

operator;

 when the blade is pinched or bound tightly by the

kerf closing down, the blade stalls and the motor

reaction drives the unit rapidly back toward the

operator;

 if the blade becomes twisted or misaligned in the

cut, the teeth at the back edge of the blade can dig

into the top surface of the wood causing the blade

to climb out of the kerf and jump back toward the

operator.

Kickback is the result of saw misuse and/or incorrect

operating procedures or conditions and can be avoided by

taking proper precautions as given below.

 Maintain a firm grip with both hands on the saw

and position your arms to resist kickback forces.

Position your body to either side of the blade, but

not in line with the blade. Kickback could cause the

saw to jump backwards, but kickback forces can be

controlled by the operator, if proper precautions are

taken.

 When blade is binding, or when interrupting a cut

for any reason, release the trigger and hold the saw

motionless in the material until the blade comes

to a complete stop. Never attempt to remove the

saw from the work or pull the saw backward while

the blade is in motion or kickback may occur.

Investigate and take corrective actions to eliminate the

cause of blade binding.

 When restarting a saw in the workpiece, centre

the saw blade in the kerf and check that saw teeth

are not engaged into the material. If saw blade is

binding, it may walk up or kickback from the workpiece

as the saw is restarted.

1 2 3 4 5 6 7 8 9

Commentaires sur ces manuels

Pas de commentaire

Ryobi EWS1150RS Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Scies circulaires Ryobi EWS1150RS