9
English (Original Instructions)
prolonged use. Before oiling, stop hedge trimmer,
remove battery pack, then oil. You then can resume
trimming. Do not oil while hedge trimmer is running.
SHARPENING BLADE
See Figure 7
Allow the blades of the hedge trimmer to come to a
stop in the position. This will allow clearance for the file
between cutter teeth and guard teeth.
Remove battery pack from hedge trimmer.
Clamp blade assembly in a vice and file the exposed
cutting surface of each blade tooth with a 203 mm (8
inch) smooth round file, 6.4 mm (1/4 inch) or 5.6 mm
(7/32 inch) diameter. Be sure to retain the original
angle of tooth when filing.
Remove the hedge trimmer from the vice, replace
battery pack and restart the hedge trimmer. Allow the
blades of the hedge trimmer to come to a stop so that
the unsharpened edges of the cutter blade teeth are
exposed.
Remove battery pack from hedge trimmer and repeat
the sharpening procedure as described above.
HEDGE TRIMMER LUBRICATION
All of the bearings in this tool are lubricated with a
sufcient amount of high-grade lubricant for the life of the
unit under normal operating procedures. Therefore, no
further lubrication is required.
WARNING
Do not attempt to modify this unit or create or mount any
accessory not specically recommended in this manual
for use with this hedge trimmer. Any such alteration or
modication is misuse and could result in a hazardous
condition leading to possible serious personal injury.
WARNING
Examine hedge trimmer frequently to assure all parts
are unbroken and securely attached. Make sure all
screws and fasteners are securely tightened to prevent
the risk of serious personal injury.
CLEANING THE HEDGE TRIMMER
WARNING
To prevent serious personal injury, remove the battery
pack before servicing, cleaning, or removing material
from the unit.
Remove the battery pack.
Clean the unit using a damp cloth with a mild detergent.
Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by
certain aromatic oils such as pine and lemon, and by
solvents such as kerosene.
Moisture can cause a shock hazard. Wipe off any
moisture with a soft dry cloth.
Use a small brush or the air discharge of a small
vacuum cleaner brush to clean the air vents on the
battery pack housing and motor housing.
Keep the air vents free of obstructions.
STORING THE HEDGE TRIMMER
See Figure 8
Clean the hedge trimmer thoroughly before storing.
Store the hedge trimmer in a dry, well-ventilated
place that is inaccessible to children. Keep away from
corrosive agents such as garden chemicals and de-
icing salts.
Always place blade cover on cutting blades before
storing.
Store and charge your batteries in a cool area.
Temperatures above or below normal room
temperature will shorten battery pack life.
Never store batteries in a discharged condition. Wait
for battery pack to cool and fully charge immediately.
Store the battery pack where the temperature is below
27°C, and away from moisture.
All batteries gradually lose their charge. The higher the
temperature, the quicker they lose their charge. If you
store your unit for long periods of time without using
it, recharge the batteries every month or two. This
practice will prolong battery pack life.
DISPOSAL
Waste electrical products should not be
disposed of together with household waste.
Please recycle where facilities exist. Check
with your local authority or retailer for
recycling advice.
(16 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels