Ryobi RHT36B Manuel de l'opérateur Page 5

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 11
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 4
4
English (Original Instructions)
is removed and the trigger is released when clearing
jammed material from blades. Do not grasp the
exposed cutting blades or cutting edges when picking
up or holding the unit.
CAUTION
Blades continue to move for a short time after unit is
turned off.
Keep hands, face, and feet at a safe distance from
moving parts. Do not touch or try to stop the cutting
blades when they are moving.
Always stop the motor when cutting is delayed or
when walking from one cutting location to another.
Keep unit clean of hedge clippings and other
materials. They may become lodged in the cutting
blades.
Store the unit inside in a dry place, either locked
up or up high to prevent unauthorised use or
damage. Keep out of the reach of children or untrained
individuals.
Replace blade cover when unit is not in use.
Never douse or squirt the unit with water or any
other liquid. Keep handles dry, clean and free from
debris. Clean after each use, see Storage instructions.
Be sure to secure the unit while transporting.
Keep these instructions. Refer to them often and
use them to instruct other users. If you loan someone
this unit, also loan them these instructions.
SERVICE
Service on unit must be performed only by
qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in a
risk of injury to the user, or damage to the unit. It may
also void your warranty.
When servicing a unit, use only identical
replacement parts. Follow instruction in the
Maintenance section of this manual. Use of
unauthorised parts or failure to follow Maintenance
Instructions may create a risk of shock or serious injury
to the user, or damage to the unit. It may also void
your warranty.
WARNING
If any parts are missing, do not operate unit until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
can differ from the declared total value depending on
the ways in which the tool is used.
WHILE OPERATING
Do not use trimmer without front handle in place.
Keep both hands on handles when unit is in use.
To avoid accidental starting, never carry your unit
with your finger on the trigger.
Stay alert and pay attention to what you are doing.
Use common sense when using this hedge trimmer.
Wear heavy, long pants, substantial footwear and
well fitting gloves. Do not wear short pants, sandals
or go barefoot.
Do not operate in poor lighting. Use the unit only in
daylight or good artificial light.
Do not over-reach or stand on unstable support.
Keep good footing and balance at all times. Do not use
whilst on a ladder.
Do not force the hedge trimmer. It will do a better
job with less risk of injury at the rate for which it was
designed.
Release the trigger, allow the motor to stop,
and remove the battery pack before performing
maintenance, repair, or making adjustments.
This hedge trimmer is to be used for cutting
hedges, bushes, and shrubs only. Do not use for
any other purpose.
Before starting the unit, make sure the cutting
blades will not come in contact with anything.
If the machine strikes or becomes entangled with
foreign objects, stop the unit immediately, remove
the battery pack and check for damage. Do not
operate before repairing damage. Do not operate the
unit with loose or damaged parts.
Watch what you are doing. Use common sense.
Maintain hedge trimmer with care. Keep cutting
edge sharp and clean for best performance and
to reduce the risk of injury. Follow instructions for
lubricating and changing accessories. Keep handles
dry, clean, and free from oil and grease.
Check damaged parts. Before further use of the
hedge trimmer, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform it's intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting of parts,
and any other condition that may affect it's operation. A
guard or other part that is damaged should be properly
repaired or replaced by an authorised service centre.
Risk of cut. Keep hands away from blades. Do not
attempt to remove cut material or hold material to be
cut when blades are moving. Make sure battery pack
Vue de la page 4
1 2 3 4 5 6 7 8 9 10 11

Commentaires sur ces manuels

Pas de commentaire