Ryobi ZRRP4010 Manuel d'utilisation et d'entretien

Naviguer en ligne ou télécharger Manuel d'utilisation et d'entretien pour Compteurs de distance Ryobi ZRRP4010. Ryobi ZRRP4010 Use and Care Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté4.9 / 5. Basé sur13 avis des utilisateurs
Vue de la page 0
1
OPERATOR’S MANUAL
Tek4® Lithium-ion
4V Laser Distance Measure
RP4010
WARNING:
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed
below, may result in electric shock, fire and/or serious personal injury.
CAUTION:
Use of controls or adjustments or perfor mance of procedures other than those speci-
fied herein may result in hazardous radiation exposure.
The laser guide radiation used in the laser distance measure attachment is Class
II with < 1mW and 630-660nm wavelengths.
Avoid direct eye exposure when using the laser and do not project the laser beam
directly into the eyes of others. Serious eye injury could result.
Do not remove or deface any prod uct labels. Removing product labels increases
the risk of exposure to laser radiation.
Do not place the instrument in a position that may cause anyone to stare into
the laser beam intentionally or unintention ally. Serious eye injury could result.
Do not operate the laser distance measure around children or allow children to
operate the tool. Serious eye injury could result.
Always turn the laser distance measure off when not in use. Leaving the tool on
increases the risk of someone inadvertently staring into the laser beam.
Use the laser distance measure only as a measurement device.
Do not operate the instrument in com bustible areas such as in the presence of
flammable liquids, gasses, or dust.
Always ensure the laser beam is aimed at a surface without reflective proper ties.
Shiny reflective materials are not suitable for laser use.
The laser shall be used and maintained in accordance with the manufacturer’s
instructions.
 Neveraimthebeamatapersonorobjectotherthanthetargetsurface.
This product should not be used without the battery cover installed.
Handle the instrument with care. Treat it as you would any other optical device such
as a camera or binoculars.
Avoid exposing the instrument to shock, continuous vibration, or extreme hot or
cold temperatures. Damage to the product and/or serious injury to the user could
result.
Use battery only with charger listed.
MODEL BATTERY PACK CHARGER
RP4010 AP4001 AP4700, AP4500
Do not use on a ladder or unstable support. Stable footing on a solid surface enables
better control of the product in unexpected situations.
Do not use the product if the switch does not turn it on and off.
Use the product in accordance with these instructions and in the manner intended
for the product, taking into account the working conditions and the work to be
performed. Use of the product for operations different from those intended could
result in a hazardous situation.
Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
Use battery products only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
When servicing a battery product, use only identical replacement parts. Follow
instructions in the Maintenance section of this manual. Use of unauthorized parts
or failure to follow Maintenance instructions may create a risk of shock or injury.
Know your battery product. Read operator’s manual carefully. Learn its
applications and limitations, as well as the specific potential hazards related to
this battery product. Following this rule will reduce the risk of electric shock, fire, or
serious injury.
IMPORTANT SAFETY INSTRUCTIONS
Do not place battery products or their batteries near fire or heat. This will reduce
the risk of explosion and possibly injury.
Do not crush, drop or damage battery pack. Do not use a battery pack or charger
that has been dropped or received a sharp blow. A damaged battery is subject to
explosion. Properly dispose of a dropped or damaged battery immediately.
Batteries can explode in the presence of a source of ignition, such as a pilot
light. To reduce the risk of serious personal injury, never use any cordless product in
the presence of open flame. An exploded battery can propel debris and chemicals. If
exposed, flush with water immediately.
Do not charge battery tool in a damp or wet location. Following this rule will reduce
the risk of electric shock.
For best results, your battery tool should be charged in a location where the
temperature is more than 50°F but less than 94°F. To reduce the risk of serious
personal injury, do not store outside or in vehicles.
Under extreme usage or temperature conditions, battery leakage may occur. If
liquid comes in contact with your skin, wash immediately with soap and water.
If liquid gets into your eyes, flush them with clean water for at least 10 minutes,
then seek immediate medical attention. Following this rule will reduce the risk of
serious personal injury.
Save these instructions. Refer to them frequently and use them to instruct others
who may use this product. If you loan someone this instrument, loan them these
instructions also.
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associ-
ated with the product.
SYMBOL / SIGNAL
MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not avoided,
will result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that may result
in property damage.
Some of the following symbols may be used on this product. Please study them and learn
their meaning. Proper interpretation of these symbols will allow you to operate the tool
better and safer.
SYMBOL / NAME DESIGNATION/ EXPLANATION
Safety Alert Indicates a potential personal injury hazard.
V Volt Voltage
Hz Hertz Frequency (cycles per second)
W Watt Power
Direct Current
Type or a characteristic of current
Laser Exposure Laser radiation - avoid direct eye exposure.
Read The
Operator’s
Manual
To reduce the risk of injury, user must read and
understand operator’s manual before using this
product.
Wet
Conditions Alert
Do not expose to rain or use in damp locations.
Recycle
Symbols
This product uses lithium-ion (Li-ion) batteries. Local,
state or federal laws may prohibit disposal of batteries
in ordinary trash. Consult your local waste authority
for information regarding available recycling and/or
disposal options.
Vue de la page 0
1 2 3 4 5 6 ... 15 16

Résumé du contenu

Page 1 - IMPORTANT SAFETY INSTRUCTIONS

1OPERATOR’S MANUALTek4® Lithium-ion 4V Laser Distance Measure RP4010 WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructio

Page 2 - OPERATION

10DESEMPAQUETADOEmbarcamos este producto completamente armado. Extraiga cuidadosamente de la caja el cargador y los accesorios, si se incluyen. Asegú

Page 3 - OPERATION OPERATION

11CÓMO TOMAR MEDICIONESVea la figura 7, página 14.Medición de una sola distancia Oprima la tecla UNITS (UNIDADES) una vez para encender el láser.

Page 4 - TROUBLESHOOTING

12CALIFORNIA - PROPUESTA DE LEY NÚM. 65ADVERTENCIA: Este producto puede contener sustancias químicas (por ejemplo, plomo) reconoci-das por el estado d

Page 5 - CONCERNANT LA SÉCURITÉ

13A - LCD Display (afficheur ACL, pantalla de cristal líquido)B - ON/DIST (ON/DIST, ON/DIST)C - Plus (plus, más)D - Minus (moins, menos)E - Reference

Page 6 - UTILISATION

14A - First measurement (première mesure, primera medición)B - Second measurement (deuxième mesure, segunda medición)C - Summary line (ligne de résum

Page 7 - UTILISATION UTILISATION

153.16 in.2.1.16 in. 16 in.A - Timer key (touche du chronomètre, llave del cronómetro)Fig. 13 Fig. 15Fig. 14Fig. 16Measurement aMeasurement BMeasureme

Page 8

16REPLACEMENT PARTS: Prior to purchasing replacement parts, please obtain your model and serial number from the product data plate.MODEL NUMBER: ____

Page 9 - SIMBOLOS

2FEATURESPRODUCT SPECIFICATIONSBattery Pack Voltage ... 4 V

Page 10 - FUNCIONAMIENTO

3OPERATION OPERATIONUnits of Measure Press and hold the UNITS key. Continuously pressing and holding the key will dis-play the same measurement in m

Page 11 - FUNCIONAMIENTO FUNCIONAMIENTO

4CALIFORNIA PROPOSITION 65WARNING:This product may contain chemicals, including lead, known to the State of California to cause cancer, birth defects,

Page 12 - GARANTÍA

5 AVERTISSEMENT : LIRE TOUTES LES INSTRUCTIONS. Le non-respect de toutes les instructions ci-dessous peut entraîner un choc électrique, un incendie

Page 13

6CARACTÉRISTIQUESFICHE TECHNIQUETension du blocs-piles ...4 V c

Page 14 - VOLUME

7UTILISATION UTILISATION Appuyer une deuxième fois sur la touche et la tenir enfoncée pour prendre une mesure à partir de la patte d’arrêt dépliée

Page 15 - Fig. 13 Fig. 15Fig. 14

8UTILISATION DÉSACTIVATION DU SIGNAL SONOREVoir la figure 17, page 15. Appuyer simultanément sur les touches [ - ] et [ ] (Référence) et les t

Page 16 - MANUAL DEL OPERADOR

9MANUAL DEL OPERADORTek4® De iones de litio de 4v medidor de distancia láserRP4010 ADVERTENCIA: LEA TODAS LAS INSTRUCCIONES. El incumplimiento de las

Commentaires sur ces manuels

Pas de commentaire