Ryobi 170r Manuel d'utilisateur télécharger pdf (Page 9)

OPERATING PROCEDURES

CONNECTING THE CORD

1. Use an appropriate extension cord to connect to

power. See Electrical Safety Warnings for

recommended cords.

OPERATING AS A BLOWER

WARNING

To reduce the risk of electric shock, this unit has a

polarized plug (one blade is wider than the other).

The outdoor extension cord used with the unit

must also be polarized. The plug on the extension

cord will fit into the unit only one way. If the plug

doesn't fit fully into the unit, reverse the plug. If it

does not fit, contact a qualified electrician to install

the proper outlet. DO NOT change the plug on the

extension cord or unit in any way.

WARNING

Wear goggles or safety glasses at all times when

operating this unit.

WARNING

Wear a dust mask in dusty locations.

2. Secure the extension cord to motor housing as shown

(Fig. 11).

Hold the blower as shown in Figs. 13, 14, or 15 and sweep

from side to side with the nozzle several inches above the

ground or floor. Slowly advance keeping the accumulated

pile of debris in front of you.

Most dry blowing operations are better suited to low speed

than high. Of course, you may choose to use either and

you’ll probably find the high speed is better for moving

heavier items like wet leaves or gravel.

1. Use the blower for trees, shrubs, flower beds and hard-

to-clean areas (Fig. 13).

Fig. 11

STARTING AND STOPPING THE

BLOWERA^AC

This unit is equipped with an Off/Low/High switch. For low

speed operation, slide the switch up to the first click, as

shown in Fig. 12. To select high speed, slide the switch up

to the second click, and to turn the tool ‘XDFF” slide the

switch all the way down.

Fig. 13

Fig. 12

1 2 3 4 5 6 7 8 9 10 11 12 13

Commentaires sur ces manuels

Pas de commentaire

Ryobi 170r Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Ventilateurs Ryobi 170r