Ryobi 310r Manuel d'utilisateur télécharger pdf (Page 6)

WARNING

Rotating impeller blades can cause severe

injury. Do not attempt to convert the unit while

the engine is running to avoid serious personal

injury. Do not put hands or any other object into

the vacuum tubes while they are installed on

the unit.

1. Remove the blower tubes.

2. Align the grooves in the vacuum bag/elbow tube

assembly with the pins in the blower outlet.

3. Grasping the tube firmly with both hands, push the

vacuum bag/elbow tube assembly into the blower

outlet (Fig. 3). Turn the assembly clockwise until it

snaps into the detent and locks. The curve of the

tube should angle upwards.

BLOWER TUBE AND NOZZLE ASSEMBLY

- BOTH MODELS

NOTE: Do not install tubes while unit is running.

1. Align the grooves in the blower tube with the pins in

the blower outlet.

2. Grasping the tube firmly with both hands, push the

tube into the blower outlet (Fig. 1). Turn the tube

clockwise until it snaps into the detent and locks.

ASSEMBLY INSTRUCTIONS

Fig. 1

3. Align the pins of the blower nozzle with the grooves in

the blower tube (Fig. 2).

4. Grasping the nozzle firmly with both hands, push the

nozzle onto the blower tube. Turn the nozzle

clockwise until it snaps into the detent and locks.

NOTE: The blower tube and nozzle or vacuum

bag must be used at all times to prevent

overheating the engine.

Fig. 2

Fig. 3

INSTALLING THE VACUUM BAG/TUBE

ASSEMBLY (OPTIONAL FOR MODEL 310r)

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Pas de commentaire

Ryobi 310r Manuel d'utilisateur Page 6