Ryobi 2075r Manuel de l'opérateur télécharger pdf (Page 12)

MAINTENANCE AND REPAIR INSTRUCTIONS

Fig. 15

3. Insert the line into the locking hole (Fig. 15)

no more than 1/2 inch (12.7 mm). Do not

push the line too far into the inner reel. A

small loop is formed when the line is inserted

correctly (Fig. 15).

Locking Hole

4. Pull the line away from the spool until the line

is tight against the inner reel (Fig. 16).

Fig. 16

Fig. 13

LINE INSTALLATION FOR THE

SPEEDSPOOL

The trimming line in the speed spool may be

replaced by two different methods.

• Winding the existing inner reel with new line

• Installing a prewound inner reel

TO INSTALL NEW TRIMMING LINE, IT IS NOT

NECESSARY TO REMOVE THE BUMP KNOB.

The Correct Line to Use

WARNING: Always use genuine

Ryobi replacement line. Do not use

metal-reinforced line.

It is very important to use the correct size line.

Use line with a diameter of 0.080 in (2.03 mm).

The motor may overheat and fail if you use a

larger line.

WINDING THE EXISTING INNER REEL WITH

NEW LINE

NOTE: Before installing new trimming line onto

the existing inner reel, remove any old line

from the SpeedSpool by pulling the line

out of the line loading or locking holes

(Figs. 14 and 15).

1. Line up the arrow on the inner reel with the

arrow on the outer spool (Fig. 13).

TOP VIEW OF THE SPEEDSPOOL

Outer

Spool

Arrow

Inner

Reel

Bump

Knob

NOTE: Do not wind the inner reel before the

second line is installed into the reel.

WARNING: Always use the correct

line length when installing trimming

line on the unit. If longer line is used

than specified in this manual, the line

may not release properly.

Fig. 14

2. Insert 10 feet (2.5 m) of .080 in (2.03 mm)

trimming line into one of the two eyelets

and push it up through the line loading hole

in the inner reel (Fig. 14). Do not bend the

line when inserting it into the eyelet.

Trimming Line

Line Loading Hole

Eyelet

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Ryobi 2075r Manuel de l'opérateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Outils de jardin Ryobi 2075r