Ryobi 2075r Manuel de l'opérateur télécharger pdf (Page 4)

WHILE OPERATING

• Wear safety glasses or goggles and

ear/hearing protection at all times when

operating this unit. Always wear a face

or dust mask if the operation is dusty.

• Dress properly. Do not operate this unit

when barefoot or wearing open sandals.

Always wear sturdy, rubber-soled footwear.

The use of gloves and long pants are

recommended.

• Do not wear loose fitting clothing or articles

such as scarves, strings, chains, ties, etc.

because they could get drawn into the air

intake. Also make sure long hair does not

get drawn into the air intake. Long hair must

be pulled back and secured off shoulders

and neck.

• The string guard must be in place at all times

while operating the unit.

• Before each use, check that the cutting

head is correctly fixed, that the trigger

returns automatically in neutral position,

and that the cutting head remains

stationary when the engine is idling.

• Before starting, adjust the handle to your size

and make sure that the cutting head is not in

contact with anything.

• Use the unit only in daylight or good

artificial light.

• Operate this unit only in a well-ventilated

area outdoors. Carbon monoxide exhaust

fumes can be lethal in a confined area.

• Avoid accidental starting. Be in the starting

position whenever pulling the starting rope.

The operator and unit must be in a stable

position while starting.

• Use the right tool. Do not use this unit for

any job except for which it is intended.

• Do not overreach. Keep proper footing and

balance at all times.

• Always hold the unit with both hands when

operating. Keep a firm grip on both the

front and rear handles or grips.

• Keep hands, face, and feet away from all

moving parts. Do not attempt to touch or

stop the cutting head when it is rotating.

• Do not touch the muffler or cylinder.

These parts get extremely hot from

operation and remain hot for a short

time after the equipment is turned off.

SAFETY WARNINGS

READ ALL INSTRUCTIONS

BEFORE OPERATING

• Read the instructions carefully. Be familiar

with the controls and proper use of the unit.

• Children and adolescents must not

manipulate units, except for adolescents

in training and under the supervision of

a specialist.

• All guards and safety attachments must be

installed properly before operating the unit.

• Thoroughly inspect the unit for loose or

damaged parts before each use. Do not

use until adjustments or repairs are made.

• Carefully inspect the areas to be cut. Remove

all debris that could become entangled in the

string or blade. Also remove any objects that

could be thrown during cutting.

• Be aware of the risk of injury to the head,

hands and feet.

SAFETY WARNINGS FOR GAS

TRIMMERS

WARNING: Gasoline is highly flammable and

its vapors can explode if ignited. Take the

following precautions:

1) Store fuel only in containers specifically

designed and approved for the storage

of such materials.

2) Always stop the engine and allow it to

cool before filling the fuel tank. Never

remove the cap of the fuel tank, or add

fuel, when the engine is hot.

3) Pressure can build up in the fuel tank.

Loosen the fuel tank cap slowly to relieve

any pressure in the tank.

4) Add fuel in a clean, well-ventilated area.

Wipe up any spilled fuel immediately. If

fuel has been spilled, avoid creating a

source of ignition or starting the engine

until fuel vapors have dissipated.

5) Ensure correct fuel or fuel/oil mixture is

used. Never operate the unit without the

fuel cap securely in place.

6) Move the unit at least 10 feet (3 m)

from the fueling point before starting the

engine. Do not smoke, keep sparks and

open flames away from the area while

adding fuel or operating the unit.

• IMPORTANT SAFETY INFORMATION •

1 2 3 4 5 6 7 8 9 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Ryobi 2075r Manuel de l'opérateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Outils de jardin Ryobi 2075r