Ryobi 2079r Manuel de l'opérateur télécharger pdf (Page 4)

DANGER: Failure to obey a safety warning

will result in serious injury to yourself or to

others. Always follow the safety precautions

to reduce the risk of fire, electric shock, and

personal injury.

WARNING: Failure to obey a safety warning

can result in injury to yourself and others.

Always follow the safety precautions to

reduce the risk of fire, electric shock, and

personal injury.

CAUTION: Failure to obey a safety warning

may result in property damage or personal

injury to yourself or to others. Always follow

the safety precautions to reduce the risk of

fire, electric shock, and personal injury.

The purpose of safety symbols is to attract your atten-

tion to possible dangers. The safety symbols, and their

explanations, deserve your careful attention and

understanding. The safety warnings do not by them-

selves eliminate any danger. The instructions or

warnings they give are not substitutes for proper acci-

dent prevention measures.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates dan-

ger, warning, or caution. Attention is required

in order to avoid serious personal injury. May

be used in conjunction with other symbols or

pictographs.

NOTE: Advises you of information or instructions vital to

the operation or maintenance of the equipment.

RULES FOR SAFE OPERATION

READ ALL INSTRUCTIONS BEFORE

OPERATING

• Read the instructions carefully. Be familiar with the

controls and proper use of the unit.

• Do not operate this unit when tired, ill, or under the

influence of alcohol, drugs, or medication.

• Children and teens under the age of 15 must not use

the unit, except for teens guided by an adult.

• Inspect the unit before use. Replace damaged parts.

Check for fuel leaks. Make sure all fasteners are in

place and secure. Replace cutting attachment parts

that are cracked, chipped, or damaged in any way.

Make sure the cutting attachment is properly

installed and securely fastened. Be sure the cutting

attachment shield is properly attached, and

positioned as recommended. Failure to so can result

in personal injury to the operator and bystanders, as

well as damage to the unit

• Use only 0.095 inch (2.41 mm) diameter genuine

Ryobi replacement line. Never use metal-reinforced

line, wire, or rope, etc.. These can break off and

become a dangerous projectile.

• Be aware of the risk of injury to the head, hands and

feet.

• Clear the area to be cut before each use. Remove all

objects such as rocks, broken glass, nails, wire, or

string which can be thrown or become entangled in

the cutting attachment. Clear the area of children,

bystanders, and pets. At a minimum, keep all

children, bystanders and pets outside a 50 ft. (15 m.)

radius; there still may be a risk to bystanders from

thrown objects. Bystanders should be encouraged to

wear eye protection. If you are approached, stop the

engine and cutting attachment immediately.

• Squeeze the throttle control and check that it returns

automatically to the neutral position. Make all

adjustments or repairs before using unit.

SAFETY WARNINGS FOR GAS TRIMMERS

WARNING: Gasoline is highly flammable,

and its vapors can explode if ignited. Take

the following precautions:

• Store fuel only in containers specifically designed

and approved for the storage of such materials.

• Avoid creating a source of ignition for spilled fuel. Do

not start the engine until fuel vapors dissipate.

• Always stop the engine and allow it to cool before

filling the fuel tank. Never remove the cap of the fuel

tank, or add fuel, when the engine is hot. Never

operate the unit without the fuel cap securely in

place. Loosen the fuel tank cap slowly to relieve any

pressure in the tank.

• Mix and add fuel in a clean, well-ventilated area

outdoors where there are no sparks or flames.

Slowly remove the fuel cap only after stopping

engine. Do not smoke while fueling or mixing fuel.

Wipe up any spilled fuel from the unit immediately.

• Move the unit at least 30 ft. (9.1 m) from the fueling

source and site before starting the engine. Do not

smoke, keep sparks and open flames from the area

while adding fuel or operating the unit.

WHILE OPERATING

• Never start or run the unit inside a closed room or

building. Breathing exhaust fumes can kill. Operate

this unit only in a well ventilated area outdoors.

• Wear safety glasses or goggles that are marked as

meeting ANSI Z87.1-1989 standards, and

ear/hearing protection when operating this unit.

Wear a face or dust mask if the operation is dusty.

Long sleeve shirts are recommended.

• The cutting attachment shield must always be in

place while operating the unit as a trimmer. Do not

operate unit without both trimming lines extended,

and the proper line installed. Do not extend the

trimming line beyond the length of the shield.

• IMPORTANT SAFETY INFORMATION •

1 2 3 4 5 6 7 8 9 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi 2079r Manuel de l'opérateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Outils de jardin Ryobi 2079r