Ryobi 770rEB Manuel d'utilisateur télécharger pdf (Page 5)

RULES FOR SAFE OPERATION

• Do not touch the engine or muffler. These parts get

extremely hot from operation. When turned off they

remain hot for a short time.

• Do not operate the engine faster than the speed

needed to cut, trim or edge. Do not run the engine at

high speed when not cutting.

• Always stop the engine when cutting is delayed or

when walking from one cutting location to another.

• If you strike or become entangled with a foreign

object, stop the engine immediately and check for

damage. Do not operate before repairing damage. Do

not operate the unit with loose or damaged parts.

• Stop and switch the engine to off for maintenance,

repair, or for changing the cutting attachment or other

attachments.

• Use only genuine Ryobi replacement parts when

servicing this unit. These parts are available from

your authorized service dealer. Do not use parts,

accessories or attachments not authorized by Ryobi

for this unit. Doing so could lead to serious injury to

the user, or damage to the unit, and void your

warranty.

• Keep unit clean of vegetation and other materials.

They may become lodged between the cutting

attachment and shield.

• To reduce fire hazard, replace faulty muffler and spark

arrestor, keep the engine and muffler free from grass,

leaves, excessive grease or carbon build up.

WHILE OPERATING WITH EDGER ADD-ON

• Inspect the unit before use. Ensure the blade is

installed correctly and secure.

• Clear the area to be edged before each use. Remove

all objects such as rocks, broken glass, nails, wire, or

string which can be thrown or become entangled in

the edging attachment.

• Do not attempt to touch or stop the blade when it is

rotating.

• A coasting blade can cause injury while it continues to

spin after the engine is stopped or the throttle control

is released. Maintain proper control until the blade has

completely stopped rotating.

• Do not run the unit at high speed when not edging.

• If you strike or become entangled with a foreign

object, stop the engine immediately and check for

damage. Have any damage repaired before attempting

further operations. Do not operate unit with a bent,

cracked or dull blade. Discard blades that are bent,

warped, cracked or broken.

• Stop the engine IMMEDIATELY if you feel excessive

vibration. Vibration is a sign of trouble. Inspect

thoroughly for loose nuts, bolts or damage before

continuing. Repair or replace affected parts as

necessary.

WHILE OPERATING WITH SWEEPER/BLOWER

ADD-ON

• Inspect the unit before use. Ensure the air intake on

sweeper/blower is free of debris.

• Do not overreach. Always keep proper footing and

balance. Take extra caution when cleaning on steps

or stairs.

• Never point the Blower in the direction of people or

pets, or in the direction of windows. Always direct the

blowing debris away from people, animals, glass, and

solid objects such as trees, automobiles, walls, etc.

OTHER SAFETY WARNINGS

• Never store the unit, with fuel in the tank, inside a

building where fumes may reach an open flame or

spark.

• Allow the engine to cool before storing or transporting.

Be sure to secure the unit while transporting.

• Store the unit in a locked up and dry or high and dry

place to prevent unauthorized use or damage, out of

the reach of children.

• Never douse or squirt the unit with water or any other

liquid. Keep handles dry, clean and free from debris.

Clean after each use, see Cleaning and Storage

instructions.

• Keep these instructions. Refer to them often and use

them to instruct other users. If you loan someone this

unit, also loan them these instructions.

SAVE THESE INSTRUCTIONS

1 2 3 4 5 6 7 8 9 10 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Ryobi 770rEB Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel de jardinage Ryobi 770rEB