Ryobi RYCI2001 Manuel d'utilisateur télécharger pdf (Page 13)

9 — English

ELECTRICAL

Application/Equipment

Estimated

Starting

Watts*

Estimated*

Additional

Starting

Watts

Emergency / Home Standby

Lights (qty. 4 x 75 W) 300 300

Refrigerator 700 1350

46 in. Flat Panel Television 190 190

Satelite Receiver 250 250

Portable Fan 40 120

Heater 1300 1300

Laptop 250 250

Slow Cooker 270 270

Radio 50 50

Job Site

ElectricDrill−3/8in. 600 1000

Quartz Halogen Work Light 1000 1000

Reciprocating Saw 960 1920

CircularSaw−7-1/4in. 1400 2300

MiterSaw−10in. 1800 1800

AirCompressor−1/4HP 970 1600

AirlessSprayer−1/3HP 600 1200

*Wattages listed are approximate. Check tool or appliance for actual wattage.

GENERATOR CAPACITY

Make sure the generator can supply enough continuous (run-

ning) and surge (starting) watts for the items you will power

at the same time. Follow these simple steps.

1. Selecttheitemsyouwillpoweratthesametime.

2. Totalthecontinuous(running)wattsoftheseitems.This

is the amount of power the generator must produce to

keep the items running. See the wattage reference chart

at right.

3. Estimatehowmanysurge(starting)wattsyouwillneed.

Surge wattage is the short burst of power needed to

start electric motor-driven tools or appliances such as a

circular saw or refrigerator. Because not all motors start

at the same time, total surge watts can be estimated by

adding only the item(s) with the highest additional surge

watts to the total rated watts from step 2.

Example:

Tool or Appliance

Running

Watts*

Additional

Starting Watts*

Refrigerator 700 1350

Portable Fan 40 120

Laptop 250 250

46 in. Flat Panel

Television

190 190

Light (75 Watts) 75 75

1255 Total

Running Watts

1350 Highest

Starting Watts

Total Running Watts 1255

Highest Starting Watts + 1350

Total Starting Watts Needed 2605

POWER MANAGEMENT

To prolong the life of the generator and attached devices,

it is important to take care when adding electrical loads to

the generator. There should be nothing connected to the

generator outlets before starting its engine. The correct and

safe way to manage generator power is to sequentially add

loads as follows:

1. With nothing connected to the generator, start the engine

as described later in this manual.

2. Plug in and turn on the first load, preferably the largest

load you have.

3. Permit the generator output to stabilize (engine runs

smoothly and attached device operates properly).

4. Plug in and turn on the next load.

5. Again, permit the generator to stabilize.

6. Repeat steps 4 and 5 for each additional load.

Never add more loads than the generator capacity. Take

special care to consider surge loads in generator capacity

as previously described.

NOTICE:

Do not overload the generator’s capacity. Exceeding the

generator’s wattage/amperage capacity may damage

the generator and/or electrical devices connected to it.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

Ryobi RYCI2001 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Générateurs Ryobi RYCI2001