Ryobi BC30 RY30060B Manuel de l'opérateur télécharger pdf (Page 21)

Page 21

MAINTENANCE

CLEANING THE EXHAUST PORT AND

MUFFLER

NOTE: Depending on the type of fuel used, the type and

amount of oil used, and/or your operating conditions, the

exhaust port, muffler, and/or spark arrestor screen may be-

come blocked with carbon deposits. If you notice a power loss

with your gas powered tool, you may need to remove these

deposits to restore performance. We highly recommended

that only qualified service technicians perform this service.

SPARK ARRESTOR

The spark arrestor must be cleaned or replaced every 25

hours or yearly to ensure proper performance of your product.

Spark arrestors may be in different locations depending on

the model purchased. Please contact your nearest service

dealer for the location of the spark arrestor for your model.

REPLACING AND CLEANING AIR FILTER

See Figures 29 - 30.

For proper performance and long life, keep air filter clean.

1. Remove the air filter cover by turning the knob

counterclockwise while gently pulling on the cover.

2. Remove the air filter, clean it in warm soapy water. Rinse

and let dry completely. For best performance, replace

annually.

3. Install the air filter. Align and install the air filter cover on

the air filter base. Secure the air filter cover by turning

the knob clockwise.

Fig. 29

KNOB

AIR FILTER COVER

AIR FILTER

COVER

AIR FILTER

Fig. 30

AIR FILTER

BASE

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Ryobi BC30 RY30060B Manuel de l'opérateur Page 21