Ryobi BC30 RY30060B Manuel de l'opérateur télécharger pdf (Page 3)

Page 3

GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow all

instructions listed below may result in electric shock, fire

and/or serious personal injury.

READ ALL INSTRUCTIONS

n For safe operation, read and understand all instructions

before using this product. Follow all safety instructions.

Failure to follow all safety instructions listed below, can

result in serious personal injury.

n Do not allow children or untrained individuals to use this

unit.

n Never start or run the engine in a closed or poorly ventilated

area; breathing exhaust fumes can kill.

n Clear the work area before each use. Remove all objects

such as rocks, broken glass, nails, wire, or string which

can be thrown or become entangled in the cutting line or

blade.

n Wear safety glasses or goggles that are marked to comply

with ANSI Z87.1 standard when operating this product.

n Wear heavy, long pants, boots, and gloves. Do not wear

loose fitting clothing, short pants, or go barefoot. Do not

wear jewelry of any kind.

n Product users on United States Forest Service land, and in

some states, must comply with fire prevention regulations.

This product is equipped with a spark arrestor; however,

other user requirements may apply. Check with your federal,

state, or local authorities.

n Never operate this unit on the operator's left side.

n Secure long hair above shoulder level to prevent

entanglement in moving parts.

n Keep all bystanders, children, and pets at least 15 m (50

ft.) away.

n Do not operate this unit when you are tired, ill, or under

the influence of alcohol, drugs, or medication.

n Do not operate in poor lighting.

n Keep firm footing and balance. Do not overreach.

Overreaching can result in loss of balance or exposure

to hot surfaces.

n Keep all parts of your body away from any moving part.

n To avoid hot surfaces, never operate the unit with the

bottom of the engine above waist level.

n Do not touch area around the muffler or cylinder of the

unit, these parts get hot from operation.

n Always stop the engine and remove the spark plug wire

before making any adjustments or repairs except for

carburetor adjustments.

n Inspect the unit before each use for loose fasteners, fuel

leaks, etc. Replace any damaged parts before use.

n The string head or blade will rotate during carburetor

adjustments.

n It has been reported that vibrations from hand-held tools

may contribute to a condition called Raynaud’s Syndrome

in certain individuals. Symptoms may include tingling,

numbness and blanching of the fingers, usually apparent

upon exposure to cold. Hereditary factors, exposure to

cold and dampness, diet, smoking and work practices

are all thought to contribute to the development of these

symptoms. It is presently unknown what, if any, vibrations

or extent of exposure may contribute to the condition.

There are measures that can be taken by the operator to

possibly reduce the effects of vibration:

a) Keep your body warm in cold weather. When oper-

ating the unit wear gloves to keep the hands and wrists

warm. It is reported that cold weather is a major factor

contributing to Raynaud’s Syndrome.

b) After each period of operation, exercise to increase

blood circulation.

c) Take frequent work breaks. Limit the amount of exposure

per day.

d) Keep the tool well maintained, fasteners tightened and

worn parts replaced.

If you experience any of the symptoms of this condition,

immediately discontinue use and see your physician about

these symptoms.

n Mix and store fuel in a container approved for gasoline.

n Mix fuel outdoors where there are no sparks or flames.

Wipe up any fuel spillage. Move 9 m (30 ft. ) away from

refueling site before starting engine.

n Stop the engine and allow to cool before refueling or storing

the unit.

n Allow the engine to cool; empty the fuel tank and secure

the unit from moving before transporting in a vehicle.

1 2 3 4 5 6 7 8 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Ryobi BC30 RY30060B Manuel de l'opérateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Tondeuses à gazon Ryobi BC30 RY30060B