Ryobi RY30961 Manuel de l'opérateur

Your new trimmer has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. Properly cared f

10INSTALLING THE POWER HEAD TO THE ATTACHMENTSee Figure 2.WARNING:Never install, remove, or adjust any attachment while power head is running.

11ATTACHING THE FRONT HANDLE − CS30 AND SS30See Figure 4. Remove 2 wing nuts, 2 bolts, and clamp from the front handle. Install the front handle o

12ATTACHING THE GRASS DEFLECTOR WARNING:The line cutting blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contac

13ATTACHING THE SHOULDER HARNESS − BC30See Figure 9. Connect the latch on the shoulder harness to the strap hanger. Adjust the strap to a comforta

14ASSEMBLYREMOVING THE STRAIGHT SHAFT GRASS DEFLECTOR AND STRING HEADSee Figures 10 - 13. Align the slot in the flanged washer with the slot in

15FUELING AND REFUELING THE TRIMMERFUEL MIXTUREThis product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle oil. Pre-m

16WARNING:Always hold the string trimmer away from the body keep-ing clearance between the body and the product. Any contact with the housing o

17  Inspect and clear the area of any hidden objects such as glass, rocks, concrete, fencing, wire, wood, metal, etc. Never use blades near sidew

18OPERATIONSTARTING AND STOPPINGSee Figures 21 - 22. Lay the trimmer on a flat, bare surface.  Press the primer bulb 7 times. Pull the starter grip

19MAINTENANCEFig. 23SPOOL RETAINERFig. 24SPRINGSLOTSSTRING HEADEYELETSSHAFT Remove the empty spool from the string head. Keep the spring attached to

2 Introduction ...

20To install the spool retainer: Turn the spool retainer clockwise for model CS30. Turn the spool retainer counterclockwise for models SS30 and BC30

21MAINTENANCECLEANING THE EXHAUST PORT AND MUFFLERDepending on the type of fuel used, the type and amount of oil used, and/or your operating

22TROUBLESHOOTINGIDLESPEEDSCREWProblem Possible Cause SolutionEngine will not start. No spark. No fuel. Engine is flooded.Check spark. Remove

23TROUBLESHOOTINGEMISSIONS MAINTENANCE SCHEDULE AND WARRANTED PARTS LISTEmissions Parts Inspect Before Clean Every Replace Clean Every Replace

24WARRANTYLIMITED WARRANTY STATEMENTTechtronic Industries North America, Inc., warrants to the original retail purchaser that this RYOBI® brand outdoo

25WARRANTYTHE FOLLOWING CALIFORNIA AIR RESOURCES BOARD (CARB) STATEMENT ONLY APPLIES TO MODEL NUMBERS REQUIRED TO MEET THE CARB REQUIREMENTS.The U.S.

TECHTRONIC INDUSTRIES NORTH AMERICA, INC.1428 Pearman Dairy RoadAnderson, SC 29625Phone 1-800-860-4050www.ryobitools.com• SERVICENow that you have pu

3GENERAL SAFETY RULESWARNING:Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire

4SPECIFIC SAFETY RULESSPECIFIC SAFETY RULES FOR TRIMMER USE Replace string head if cracked, chipped, or damaged in any way. Be sure the st

5SYMBOLSSome of the following symbols may be used on this product. Please study them and learn their meaning for safe operation of this product.SYMBOL

6SYMBOLSSERVICEServicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we sugge

7FEATURESPRODUCT SPECIFICATIONSWeight - (without fuel) CS30 ...

8FEATURESFig. 1bFig. 1cTHROTTLE TRIGGER FRONT HANDLECOUPLERDRIVE SHAFT HOUSINGSTRING HEADSTRAIGHT SHAFT GRASS DEFLECTORTHROTTLE TRIGGER“J” HANDLECOUPL

9WARNING:If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could result in se