Ryobi RY70105A Manuel de l'opérateur télécharger pdf (Page 10)

ASSEMBLY

BLADE GUARD

See Figure 8.

1. Attach the blade guard to the mounting bracket; install

the four screws (10-24 x 3/4 in) from the top of the mount-

ing bracket through the blade guard and into the

threaded mounting plates.

2. Using the torque wrench supplied, tighten all four screws

securely.

NOTE: When using the string head, the string shield must be

attached to blade guard.

GRASS DEFLECTOR

See Figure 8.

1. Attach the grass deflector to the blade guard by placing

the three locking tabs into the three notches.

2. Snap the blade guard and grass deflector together to

lock into place.

Fig. 8

MOUNTING CLAMP

FOUR SCREWS

THREADED

MOUNTING PLATES

BLADE GUARD

GRASS DEFLECTOR

LOCKING TABS

NOTCHES

WARNING:

Always stop the engine and remove the sparking

plug wire before making any adjustments such as

changing cutting heads; this is to reduce the risk of

serious personal injury.

UPPER FLANGE

WASHER

HOLDING PIN

SPOOL RETAINER

GRASS

DEFLECTOR

Fig. 9

STRING HEAD

DRIVE CONNECTOR

CONVERTING FROM TRIMMER TO

BRUSHCUTTER

REMOVING THE STRING HEAD

See Figure 9.

1. Align the slot in the upper flange washer with the hole in

the gear head. Place the holding pin through the slot in

the upper flange washer and the hole in the gear head.

Turn the spool retainer clockwise to remove. Remove

the spool and string head from the drive connector.

2. Place the holding pin through the upper flange washer

and the gear head. Using the 16 mm (5/8 in) spanner

supplied, turn the drive connector clockwise to remove.

3. Remove the upper flange washer from the gear shaft

and retain for blade installation.

4. Remove the grass deflector by pushing in on the three

locking tabs while pulling on the grass deflector to

separate from the blade guard.

NOTE: Store the string head parts together for later use.

SPANNER

(16 mm)

GEAR HEAD

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY70105A Manuel de l'opérateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Tondeuses à gazon Ryobi RY70105A