Ryobi RY70105A Manuel de l'opérateur télécharger pdf (Page 11)

ASSEMBLY

BLADE

GUARD

BLADE

CUPPED

WASHER

BLADE NUT

HOLDING PIN

Fig. 10

SPANNER

(13 mm)

UPPER FLANGE

WASHER

INSTALLING THE BLADE

See Figure 10.

1. Place the upper flange washer over the gear shaft with

the hollow side towards the blade guard.

2. Centre the blade on the upper flange, making sure the

blade sits flat. Install the cupped washer with the raised

centre away from the blade. Install the blade nut. The

blade turns anticlockwise from the operator’s position.

3. Place the holding pin through the slot in the upper flange

washer and the hole in the gear head. Using the 13 mm

(1/2 in) spanner supplied, turn the blade nut

anticlockwise.

4. Tighten nut securely.

CONVERTING FROM BRUSHCUTTER TO

TRIMMER

REMOVING THE BLADE

See Figure 10.

1. Place the holding pin through the slot in the upper flange

washer and the gear head. Turn the blade nut clockwise

to remove.

2. Remove the cupped washer and the blade.

3. Remove the upper flange washer from the gear shaft

and retain for the string head installation.

4. Attach the grass deflector to the blade guard by placing

the three locking tabs into the three notches.

5. Snap the blade guard and grass deflector together to

lock into place.

NOTE: Store the brushcutter parts together for later use.

INSTALLING THE STRING HEAD

See Figure 9.

1. Install the upper flange washer onto the gear shaft with

the hollow side towards the gear head.

2. Place the holding pin through the slot in the upper flange

washer and the hole in the gear head. Using the 16 mm

(5/8 in) spanner supplied, turn the drive connector

anticlockwise to install. Tighten securely.

3. Place the string head on the drive connector.

4. Place the holding pin through the slot in the upper flange

washer and the hole in the gear head. Install the spool

retainer and turn anticlockwise to tighten securely.

GEAR HEAD

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY70105A Manuel de l'opérateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Tondeuses à gazon Ryobi RY70105A