Ryobi RY70105A Manuel de l'opérateur télécharger pdf (Page 13)

OPERATION

ADVANCING THE STRING

ADVANCING STRING USING THE EZ LINE™ TAP

ADVANCE SYSTEM

String advance is controlled by tapping string head on grass

while running engine at full throttle.

1. Run engine at full throttle.

2. Tap string head on ground to advance string. String

advances each time the head is tapped.

3. Several taps may be required until string strikes the cut-

off blade.

4. Resume trimming.

NOTE: If the string is worn too short you may not be able to

advance the string by tapping it on the ground. If so, STOP

THE ENGINE, and manually advance the string.

ADVANCING THE STRING MANUALLY

Push the spool retainer down while pulling on string(s) to

manually advance the string.

CUTTING TIPS

See Figure 12.

■ Keep the trimmer tilted towards the area being cut; this

is the best cutting area.

■ Do not cut in dangerous cutting area.

■ Use the tip of string to do the cutting; do not force string

head into uncut grass.

■ Wire and picket fences cause extra string wear, even

breakage. Stone and brick walls, kerbs and wood may

wear string rapidly.

■ Avoid trees and shrubs. Tree bark, wood mouldings,

cladding and fence posts can easily be damaged by

the string.

GRASS DEFLECTOR LINE TRIMMING CUT-

OFF BLADE

See Figure 13.

This trimmer is equipped with a line trimming cut-off blade

on the grass deflector. For best cutting, advance string until

it is trimmed to length by the cut-off blade. Advance string

whenever you hear the engine running faster than normal.

This will maintain best performance and keep string long

enough to advance properly.

Fig. 13

BEST CUTTING

AREA

DANGEROUS

CUTTING AREA

Fig. 12

DIRECTION OF

ROTATION

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY70105A Manuel de l'opérateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Tondeuses à gazon Ryobi RY70105A