Ryobi RP4020 Manuel d'utilisateur télécharger pdf (Page 3)

3 – English

GENERAL SAFETY RULES

WARNING -

Read all instructions. Failure to follow all instructions

listed below may result in electric shock, fire and/or

serious injury. To reduce the risk of injury, user must read

instruction manual.

SAVE THESE INSTRUCTIONS

Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body

is earthed or grounded.

Do not expose battery products to rain or wet

conditions. Water entering a battery product will increase

the risk of electric shock.

Do not abuse the leads. Never use the leads for car-

rying or pulling the battery product. Keep leads away

from heat, oil, sharp edges or moving parts. Damaged

or entangled leads increase the risk of electric shock.

Use battery only with charger listed.

MODEL BATTERY PACK CHARGER

RP4020 AP4001 AP4700, AP4500

Stay alert, watch what you are doing and use common

sense when operating a battery product. Do not use

a battery product while you are tired or under the

influence of drugs, alcohol or medication. A moment

of inattention while operating battery products may result

in serious personal injury.

Do not overreach. Keep proper footing and balance at

all times. Do not use on a ladder or unstable support.

Stable footing on a solid surface enables better control

of the battery product in unexpected situations.

Maintain this product. Check breakage of parts and

any other condition that may affect the product’s

operation. If damaged, have the product repaired

before use. Many accidents are caused by poorly

maintained products.

Dress properly. Do not wear loose clothing or jewelry.

Keep your hair, clothing and gloves away from leads

or moving parts. Loose clothes, jewelry or long hair can

be caught in moving parts.

Wear rubber-bottomed shoes or sneakers when

working with high-voltage equipment. Make sure

that the controls applied will prevent operation of the

equipment and that all hazardous energy, including

residual or stored energy, is blocked, discharged, or

relieved prior to starting work.

If you need to probe or otherwise touch circuits with

power off, discharge (across) large power supply filter

capacitors (at least 2 times). Monitor while discharging

and/or verify that there is no residual charge using the

multimeter.

If you must probe live, put electrical tape over all

but the last 1/16 in. of the test probes to avoid the

possibility of an accidental short, which could cause

damage to various components. Clip the reference end

of the meter or scope to the appropriate ground return

so that you need to only probe with one hand.

Never enter alone into an area containing exposed

electrical energy sources.

Use only the test instruments and insulated tools

rated for the voltage and current specified.

Store idle battery products out of the reach of children

and do not allow persons unfamiliar with the battery

product or these instructions to operate the product.

Battery products are dangerous in the hands of untrained

users.

Maintain battery products. Check for misalignment

or binding of moving parts, breakage of parts and

any other condition that may affect the product’s

operation. If damaged, have the product repaired

before use. Many accidents are caused by poorly

maintained products.

Use the product and accessories in accordance with

these instructions and in the manner intended for the

particular type of product, taking into account the

working conditions and the work to be performed.

Use of the product for operations different from those

intended could result in a hazardous situation.

BATTERY PRODUCT USE AND CARE

Ensure the switch is in the OFF position before

inserting battery pack. Inserting the battery pack into

products that have the switch on invites accidents.

Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another battery pack.

Use battery products only with specifically designated

battery packs. Use of any other battery packs may create

a risk of injury and fire.

When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys, nails,

screws, or other small metal objects that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

Under abusive conditions, liquid may be ejected from

the battery, avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

When servicing a battery product, use only identical

replacement parts. Follow instructions in the

Maintenance section of this manual. Use of unauthorized

parts or failure to follow Maintenance instructions may

create a risk of shock or injury.

Know your battery product. Read operator’s manual

carefully. Learn its applications and limitations, as

well as the specific potential hazards related to this

product. Following this rule will reduce the risk of electric

shock, fire, or serious injury.

1 2 3 4 5 6 7 8 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Ryobi RP4020 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Écouteurs Ryobi RP4020