Ryobi RP4310 Manuel d'utilisateur télécharger pdf (Page 7)

7 – English

OPERATION

WARNING:

Do not allow familiarity with products to make you care-

less. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always remove battery pack from the product when you

are assembling parts, making adjustments, cleaning, or

when not in use.

WARNING:

Do not use any attachments or accessories not recom-

mended by the manufacturer of this product. The use

of attachments or accessories not recommended could

result in property damage or malfunction of the product.

INSTALLING THE MOUNTING BRACKET

See Figure 2, page 10.

A convenient wall mount bracket is included for hanging

your key lock box and storing keys on or near the item you

want to secure.

Once the key lock box is installed and secured onto the

mounting bracket, the screws for the mounting bracket can

not be accessed without removing the unit.

Select a suitable, sturdy location for hanging the key box

before installing the mounting bracket. This will help to

decrease the chance of mechanical failure.

When selecting a location for installing the mounting

bracket, make sure there is adequate space for opening

the key door and operating the key lock box. There should

not be any wiring behind the location where you will be

drilling holes for the mounting bracket.

Using the bracket as a guide, mark the location of the

two holes for the included screws and drill the holes.

If mounting into drywall, you may wish to use the included

drywall anchors.

Insert the screws into the holes and tighten them to secure

the mounting bracket.

Install and secure the key lock box.

TO OPEN/CLOSE THE DOOR KNOB LOOP

See Figures 2 - 3, page 10.

Your key lock box is designed to hang on a standard door

knob or the included mounting bracket.

Enter any stored code, press the door release button,

and press OPEN to open the key door.

With the key door open, hold the unit and pull down firmly

on the key door. The door knob loop on top of the unit

will be released.

To lock the door knob loop, push the free end into the

unit until it clicks into place.

NOTE: The door knob loop can only be locked while the

key door is open.

WARNING:

Always remove battery pack from your battery product

when you are assembling parts, making adjustments,

cleaning, or when not in use. Removing battery pack

will prevent accidental starting that could cause serious

personal injury.

TO INSTALL/REMOVE THE BATTERY PACK

See Figures 4 - 7, page 11.

To install the battery pack:

To open the key door, insert a backup key into the lock

on the side of the key lock box, press and hold the door

release button, and turn the key.

The key storage compartment is on the right side of the

key drawer. The battery compartment is on the left.

To open the battery door, push the tab in the direction

indicated by the OPEN arrow.

Insert the battery pack in the direction shown. Make sure

the raised rib on the battery pack aligns with the groove

in the compartment.

Close the battery door and push the thumb tab to the

right to close.

Push up on the key door to close and lock it.

With the battery pack installed, the unit is ready for setting

codes.

Do not attempt to use this product if the battery cap is

not securely closed.

To remove the battery pack:

Enter any stored code, press the door release button, and

press OPEN to open the key door. You can also insert a

backup key into the lock on the side of the key lock box,

press and hold the door release button, and turn the key

to open the door.

Push the tab to open the battery door.

Remove the battery pack.

NOTE: If the battery pack is removed, codes will be retained

in memory.

SETTING TIME AND DATE

See Figure 8, page 11.

When a battery pack is inserted, the display enters Time and

Date Set mode. All digits will blink twice, and then the Hour

segment will blink.

NOTE: After you have set the hour, the minutes, year, month,

and date sections will also blink when they are ready to

set.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Ryobi RP4310 Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Écouteurs Ryobi RP4310