Ryobi ELS-52 Manuel d'utilisateur télécharger pdf (Page 20)

SERVICE

Servicing requires extreme care and knowledge and

should be performed only by a quali.ed service technician.

For service we suggest you return the product to your

nearest AUTHORIZED SERVICE CENTER for repair.

When servicing, use only identical replacement parts.

WARNING

To avoid serious personal injury, do not attempt

to use this product until you read thoroughly and

understand completely the operator’s manual.

Save this operator’s manual and review

frequently for continuing safe operation and

instructing others who may use this product.

ELECTRICAL

EXTENSION CORDS

When using a power tool at a considerable distance from

the power source, use an extension cord heavy enough

to carry the current that the tool will draw. An undersized

extension cord will cause a drop in line voltage, resulting

in a loss of power and causing the motor to overheat.

When working with the tool outdoors, use an extension

cord that is designed for outside use.

Before using an extension cord, inspect it for loose or

exposed wires and cut or worn insulation.

WARNING

Keep the extension cord clear of the working

area. Position the cord so that it will not get

caught on lumber, tools or other obstructions

while you are working with a power tool. Failure

to do so can result in serious personal injury.

WARNING

Check extension cords before each use.

If damaged replace immediately. Never use tool

with a damaged cord since touching the

damaged area could cause electrical shock

resulting in serious injury.

ELECTRICAL CONNECTION

This tool is powered by a precision built electric motor.

It should be connected to a power supply that is

230 volts, 50 Hz, AC only (normal household current).

Do not operate this tool on direct current (DC).

A substantial voltage drop will cause a loss of power and

the motor will overheat. If the product does not operate

when plugged into an outlet, double check the power

supply.

SPEED AND WIRING

The speed is not constant and decreases under a load or

with lower voltage. For voltage, the wiring in a shop is as

important as the motor’s horsepower rating. A line intended

only for lights cannot properly carry a power tool motor.

Wire that is heavy enough for a short distance will be too

light for a greater distance. A line that can support one

power tool may not be able to support two or three tools.

GROUNDING INSTRUCTIONS

In the event of a malfunction or breakdown, grounding

provides a path of least resistance for electric current to

reduce the risk of electric shock. This tool is equipped with

an electric cord having an equipment-grounding conductor

and a grounding plug. The plug must be plugged into a

matching outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Do not modify the plug provided. If it will not fit the outlet,

have the proper outlet installed by a qualified electrician.

Improper connection of the equipment-grounding

conductor can result in a risk of electric shock. The

conductor with insulation having an outer surface that is

green with or without yellow stripes is the equipment-

grounding conductor. If repair or replacement of the

electric cord or plug is necessary, do not connect the

equipment-grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if

the grounding instructions are not completely understood,

or if in doubt as to whether the tool is properly grounded.

Repair or replace a damaged or worn cord immediately.

PRODUCT SPECIFICATIONS

Hydraulic Cylinder Pressure 13~16 MPa

Force 4 tons

Oil Capacity 3.5 L

Voltage 230 V~50 Hz

In Put Power 1500 W

No Load Speed 2970±10% rpm

Noise Level 85 dB

Net Weight 45 Kg

Log Capacity Diameter, maximum 250 mm

Log Capacity Diameter, minimum 100 mm

Log Capacity Length 520 mm

DESCRIPTION

1. Bleed screw

2. Hydraulic control lever

3. Ram

4. Oil drain bolt with dipstick

English

E I P NL FIN GR TR

ELS-52_9 lgs 12/3/01 2:36 PM Page 15

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 96 97

Commentaires sur ces manuels

Pas de commentaire

Ryobi ELS-52 Manuel d'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Séparateurs de bûches Ryobi ELS-52