Ryobi ELS-52 Manuel d'utilisateur Page 21

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 97
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 20
DESCRIPTION
5. Side supports
6. Push button box
7. On / Off switch
8. Lift handle
9. Axle
10. Hitch pin
11. Washer
12. Dip stick
13. Oil lines
14. Wood wedge
15. Reset button
16. Work table
17. Wedge
PACKING LIST
1 x Log splitter
1 x Manual
2 x Wheel
2 x Axle
4 x Washer
2 x Hitch pin
KNOW YOUR LOG SPLITTER (Fig. 1)
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
BLEED SCREW
Loosen the bleed screw (1) to ensure the smooth flow of
air in and out of the oil tank.
HYDRAULIC CONTROL LEVER
Push down on the hydraulic control lever (2) and the ram
(3) starts pushing the log into the wedge (17).
LIFT HANDLE
The lift handle (8) makes rolling the log splitter from one
location to another simple and easy.
RESET/OVERLOAD BUTTON
If the motor is overloaded the machine will shut off.
Remove the load and push the reset/overload button (15)
to restart the machine.
OIL DRAIN BOLT WITH DIPSTICK
Oil drain bolt with dipstick (4) makes checking and
changing hydraulic oil easy.
SIDE SUPPORTS
Side supports (5) on each side of the work table (16)
keep logs resting securely on the log splitter.
WORK TABLE
Provides surface to support log prior to splitting
operation.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
Carefully remove the tool and any accessories from
the box. Make sure that all items listed in the packing
list are included.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
WARNING
If any parts are missing do not operate this tool
until the missing parts are replaced. Failure to do
so could result in possible serious personal injury.
WARNING
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
WARNING
Failure to loosen the bleed screw prior to
operation of this product may cause the seals in
the hydraulic system to blow out. Blown seals
could cause permanent damage to the log splitter.
ASSEMBLING THE WHEELS (Fig. 2)
To attach the wheels to the base:
Locate the axle (9) assembly; remove the hitch pin
(10) from the axle.
Lift the machine slightly and slip the axle into the
wheel hole.
16
GB
F
English
E I P NL FIN GR TR
ELS-52_9 lgs 12/3/01 2:36 PM Page 16
Vue de la page 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 96 97

Commentaires sur ces manuels

Pas de commentaire