Ryobi RY15550 Manuel de l'opérateur télécharger pdf (Page 10)

8 — English

OPERATION

WARNING:

Read and understand entire Operator’s Manual for

each optional attachment used on this power head and

follow all warnings and instructions. Failure to follow all

instructions could result in electric shock, fire and/or

serious personal injury.

WARNING:

Do not allow familiarity with products to make you

careless. Remember that a careless fraction of a second

is sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked

to comply with ANSI Z87.1. Hearing and/or head

protection may also be required depending on the type

of attachment used and as prescribed in the attachment’s

Operator’s Manual. Failure to do so could result in objects

being thrown into your eyes and other possible serious

injuries.

WARNING:

Do not use any attachments or accessories not

recommended by the manufacturer of this product. The

use of attachments or accessories not recommended

can result in serious personal injury.

This product will accept Ryobi 40 V lithium-ion battery

packs only.

For complete charging instructions, refer to the Operator’s

Manuals for your Ryobi battery pack and charger models.

WARNING:

Always remove battery pack from your tool when you are

assembling parts, making adjustments, cleaning, or when

not in use. Removing battery pack will prevent accidental

starting that could cause serious personal injury.

INSTALLING/REMOVING BATTERY PACK

See Figure 4.

To install battery pack:

 Place the battery pack in the power head. Align raised

ribs on battery pack with grooves in the power head’s

battery port.

WARNING:

Make sure the latch on the bottom of the battery pack

snaps in place and the battery pack is fully seated and

secure in the power head battery port before beginning

operation. Failure to securely seat the battery pack could

cause the battery pack to fall out, resulting in serious

personal injury.

To remove battery pack:

 Press and hold the battery latch button at the bottom of

the battery pack.

 Remove battery pack from the power head.

WARNING:

To avoid serious personal injury, always remove the

battery pack and keep hands clear of the trigger lock-out

when carrying or transporting the tool.

ADJUSTING THE FRONT HANDLE

See Figure 5.

The angle of the front handle can be adjusted 180°.

 Remove the battery pack.

 Set the power head on a flat surface and turn the knob

counterclockwise to loosen the handle.

 Adjust the handle as desired.

 Turn the knob clockwise until the handle is securely

tightened before reinstalling the battery pack.

STARTING/STOPPING THE POWER HEAD

See Figure 6.

To start:



Press and hold the trigger lock-out.



Depress the switch trigger.

To stop:



Release the switch trigger to stop the power head.



Upon release of the switch trigger, the trigger lock-out

will automatically reset to the locked position.

OPERATING THE POWER HEAD

See Figures 7 - 11.

Hold the power head with your right hand on the rear handle

and your left hand on the front handle. Keep a firm grip with

both hands while in operation. Power head should be held at

a comfortable position with the rear handle about hip height.

Always operate power head with switch trigger completely

depressed. If debris becomes wrapped around the

attachment, RELEASE THE SWITCH TRIGGER, remove the

battery pack, and remove the debris.

TRIGGER LOCK-OUT (GÂCHETTE AVEC VERROU,

GATILLO CON SEGURO)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY15550 Manuel de l'opérateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Mini-faucheuses Ryobi RY15550