Ryobi RY15550 Manuel de l'opérateur télécharger pdf (Page 11)

9 — English

OPERATION

WARNING:

Extreme care must be taken when using a blade attach-

ment to ensure safe operation. Read the safety informa-

tion for safe operation when using a blade attachment

and refer to the safety rules and instructions in your at-

tachment manual. Never use a brush cutter attachment

with this power head. Improper operation of a blade or

any attachment could result in serious injury.

WARNING:

Always hold the power head away from the body keeping

clearance between the body and the tool. Any contact

with an attachment cutting head can result in burns and/

or other serious personal injury.

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts.

Use of any other parts can create a hazard or cause

product damage.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1, along with hearing protection.

Head protection may also be required depending on

the type of attachment used and as prescribed in the

attachment’s Operator’s Manual. Failure to do so could

result in objects being thrown into your eyes and other

possible serious injuries.

WARNING:

To avoid serious personal injury, always remove the bat-

tery pack from the tool when cleaning or performing any

maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use. Use

clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken or

destroy plastic which can result in serious personal injury.

Only the parts shown on the parts list are intended to be

repaired or replaced by the customer. All other parts should

be replaced at an Authorized Service Center.

CLEANING THE POWER HEAD

 Stop the motor and remove the battery pack.

 Clean dirt and debris from the power head using a damp

cloth with a mild detergent.

NOTICE:

Do not use any strong detergents on the plastic housing or

the handle. They can be damaged by certain aromatic oils

such as pine and lemon, and by solvents such as kerosene.

STORING THE POWER HEAD

 Remove the battery pack from the power head before

storing.

 Clean all foreign material from the power head.

 Store it in a place that is inaccessible to children.

 Keep away from corrosive agents such as garden chemi-

cals and de-icing salts.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

Motor fails to start when switch

trigger is depressed

Battery is not secure.

Battery is not charged.

To secure the battery pack, make sure the latch on the

bottom of the battery pack is snapped into place.

Charge the battery pack according to the instructions

included with your model.

TRIGGER LOCK-OUT (GÂCHETTE AVEC VERROU,

GATILLO CON SEGURO)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY15550 Manuel de l'opérateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Mini-faucheuses Ryobi RY15550