Ryobi RY15550 Manuel de l'opérateur télécharger pdf (Page 5)

3 — English

WARNING!

When using electric gardening appliances, basic safety

precautions should always be followed to reduce the risk

of fire, electric shock and personal injury.

READ ALL INSTRUCTIONS

 For safe operation, read and understand all instructions

before using this product. Follow all safety instructions.

Failure to follow all safety instructions listed below, can

result in serious personal injury.

 Do not allow children or untrained individuals to use this

unit.

Check the work area before each use. Remove all objects

such as rocks, broken glass, nails, wire, or string which

can be thrown or become entangled in the machine.

 Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Following this rule will reduce

the risk of serious personal injury.

Use Safety Glasses – Always use face or dust mask if

operation is dusty.

Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule will reduce the risk

of serious personal injury.

 Dress Properly – Use of rubber gloves and substantial

footwear is recommended when working outdoors. Wear

heavy, long pants, long sleeves, boots, and gloves. Do

not wear loose fitting clothing, short pants, sandals, or

go barefoot. Do not wear loose clothing or jewelry. They

can be caught in moving parts. Secure long hair above

shoulder level to prevent entanglement in moving parts.

Keep children away – Keep all bystanders, children, and

pets at least 50 ft. away.

Stay alert – Watch what you are doing. Use common sense.

Do not operate this unit when you are tired, ill, upset, or

under the influence of alcohol, drugs, or medication.

Do not operate in poor lighting.

Keep all parts of your body away from any moving part.

Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases, or

dust. Power tools create sparks which may ignite the

dust or fumes.

Avoid body contact with grounded surfaces such as

pipes, radiators, ranges, and refrigerators. There is an

increased risk of electric shock if your body is grounded.

Avoid Dangerous Environments – Don’t expose appliance

to rain or wet conditions. Water entering an appliance will

increase the risk of electric shock.

IMPORTANT SAFETY INSTRUCTIONS

Use Right Appliance – Do not use appliance for any job

except that for which it is intended. Do not force tool.

Use the correct tool for your application. The correct tool

will do the job better and safer at the rate for which it is

designed.

Don’t Force Appliance – It will do the job better and with

less likelihood of a risk of injury at the rate for which it

was designed.

Do not operate the equipment while barefoot or when

wearing sandals or similar lightweight footwear. Wear

protective footwear that will protect your feet and improve

your footing on slippery surfaces.

Do not overreach – Keep firm footing and balance.

Overreaching can result in loss of balance.

Avoid accidental starting – Be sure switch trigger is in

the locked or off position before inserting battery pack.

Carrying tools with your finger on the switch trigger or

inserting the battery pack into a tool with the switch on

invites accidents.

Do not use tool if switch trigger does not turn it on or off.

Any tool that cannot be controlled with the switch trigger

is dangerous and must be repaired.

Disconnect power head – Disconnect battery pack from

the appliance before storing, servicing, or changing

accessories such as cutting line. Such preventive safety

measures reduce the risk of starting the tool accidentally.

Use only identical manufacturer’s replacement parts and

accessories. Use of any other parts may create a hazard

or cause product damage.

Maintain appliance with care – Replace string head if

cracked, chipped, or damaged in any way. Be sure the

string head is properly installed and securely fastened.

Failure to do so can cause serious injury. Follow instruc-

tions for lubrication and changing accessories. Inspect

charger cord periodically and, if damaged, have it replaced.

Keep power head handles dry, clean, and free from grease

and oil.

Check Damaged Parts – Before further use of the appli-

ance, a guard or other part that is damaged should be

carefully checked to determine that it will operate properly

and perform its function. Check for alignment of moving

parts, binding of moving parts, breakage of parts, mount-

ing and any other condition that may effect its operation.

A guard or other part that is damaged should be properly

repaired or replaced by an authorized service center un-

less indicated elsewhere in this manual.

Keep hands and feet away from cutting area.

 Make sure all guards, straps, deflectors and handles are

properly and securely attached.

 Use only the manufacturer’s replacement string in the

cutting head when using a string trimmer attachment.

Do not use any other cutting attachment, for example,

metal wire, rope, or the like. To install any other brand of

1 2 3 4 5 6 7 8 9 10 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY15550 Manuel de l'opérateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Mini-faucheuses Ryobi RY15550