Ryobi DBJ50 Instructions d'exploitation Page 114

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 139
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 113
Page 105 Power Equipment Usage Manual (Rev. 5/10)
21.2. Set-Up & Use – Edge Router Table
Taking several shallow passes will yield a better cut than trying to cut too
aggressively which may lead to a poor cut quality or excessive tear-out.
21.2.1. Horizontal Table Specifications
Micro adjustable bit height adjustments. 1/16" per turn allows for very precise adjustments:
(1/4 turn = 1/64", 1/2 turn = 1/32", 3/4 turn = 3/64").
Table is 24" wide x 20" deep x 25" height with surface extension fences, on both sides of the
router plate give maximum support to long stock.
Router plate is held in routing position by aluminum extrusions, along with two locking knobs
which safely secure the sliding router plate in position.
Raise your router up to 2-3/8" above the table.
21.2.2. Adjusting Bit Height
a. Loosen the two knobs that lock the router into
place.
b. Turn the crank on the top of the assembly to
raise and lower the router to desired position.
One revolution equals 1/16”.
c. Tighten the two knobs that lock the router into
place.
21.2.3. Adjusting Router Settings
The router is a 2 horsepower Bosch 1613EVS router with variable speed and fine
adjustment knob.
To adjust the router or to install bits, just swing the horizontal table sideways for easy access to the
router unit.
Vue de la page 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 138 139

Commentaires sur ces manuels

Pas de commentaire