Ryobi DBJ50 Instructions d'exploitation télécharger pdf (Page 47)

Page 38 Power Equipment Usage Manual (Rev. 5/10)

8. SAW, BAND (15” General International 490, 14” LaGuna LT14-3000 Series, 20” Delta 28-

640/641)

Band saws are capable of performing a wide range of cuts such as ripping, cross cutting, beveled cuts,

curves and re-sawing (slicing thick boards into several thinner boards).

The Woodshop has the following bandsaws:

• One 15” General International 490 is setup with a 1/4" blade for fine turns and has a fence

system.

• One 15” General International 490 is setup with a 3/8” blade and a fence system.

• One 14” LaGuna LT14-3000 Series is setup with a 1/2” blade and a LaGuna Drift Master Fence

for re-sawing boards.

• One 20” Delta 28-640/641 setup with a 1” blade for re-sawing of boards and logs.

General LaGuna Delta

8.1. Safety Precautions

DO NOT BACK WORKPIECE OUT OF A CURVE CUT WHILE THE SAW IS RUNNING.

STOP THE SAW, then backout the workpiece! Backing out of straight cuts is OK,

but must be done carefully. Relief cuts are necessary when making curved cuts

that are too tight for the blade.

a. NEVER leave a saw running unattended. Turn OFF the power and make sure the blade has

stopped completely before leaving the area.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 138 139

Pas de commentaire

Ryobi DBJ50 Instructions d'exploitation Page 47