Ryobi DBJ50 Instructions d'exploitation Page 71

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 139
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 70
Page 62 Power Equipment Usage Manual (Rev. 5/10)
b. The depth scale (C) indicates the distance from the top edge of the workpiece to the blade:
NOTE: The bottom line on scale (C) begins at 1/4" and all lines are in 1/16" increments.
The line across the center of the index block (D) indicates the distance to the center of the
blade.
The top edge of the index block (D) indicates the distance to the bottom of the blade.
The bottom edge of the index block (D) indicates the distance to the top of the blade.
The width of the index block (D) is equal to the thickness of the blade.
c. Once fence is in desired position, tighten knob (A) to secure in place.
13.3.4. Angle Adjustment using Adjustable Fence
See Figures 5, 6, 7 and 8:
a. Loosen locking knob (A).
b. For angles between 0° and 90°: swing fence downward until desired angle on lower scale (B),
aligns with lower index mark (E). Tighten knob (A), to secure in place.
c. For angles between 9and 135°: swing fence downward until the “gate” between the upper
scale (D), and lower scale (B), aligns with locking knob. Swing scale arm down to align knob with
upper scale. Move fence until desired angle on upper scale (D), aligns with upper index mark
(C). Tighten knob (A), to secure in place.
Fig.
3
Fig. 4
Vue de la page 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 138 139

Commentaires sur ces manuels

Pas de commentaire