Ryobi DBJ50 Instructions d'exploitation Page 72

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 139
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 71
Page 63 Power Equipment Usage Manual (Rev. 5/10)
13.3.5. Positioning Grooves for Biscuits
The number of grooves (biscuits) used in a joint may be varied to provide the strength required for the
particular application. Typically, the center of the first groove is positioned approximately 2” from the
edge of the work with additional grooves spaced at 3” to 6” on centers, or for longer boards every 12” to
18“.
In most cases, one line of grooves (biscuits) positioned approximately along the centerline of the
material is used. On thicker material, an additional row(s) of biscuits may be used for added strength.
The possibilities are almost endless.
To ensure proper alignment of joined wood, position the two workpieces (see Figure 9) in the
relationship desired after joining. Mark the centerline of each groove required to mark the position for
the biscuit joiner. Use a square to assure accuracy.
Fig.
5
Fig. 6
Fig.
7
Fig. 8
Vue de la page 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 138 139

Commentaires sur ces manuels

Pas de commentaire