Ryobi DBJ50 Instructions d'exploitation télécharger pdf (Page 96)

Page 87 Power Equipment Usage Manual (Rev. 5/10)

17. MORTISER, HOLLOW CHISEL (Powermatic 719A)

(NOTE: Portions of the information presented in this section were taken from the Powermatic

Operating Manual.)

A mortiser is used to cut square or rectangular holes in a piece of lumber, such as a mortise in a mortise

and tenon joint. A drill bit clears out most of the material to be removed and a chisel ensures the edges

are straight and clean.

17.1. Safety Precautions

a. DO NOT force the tool.

b. MAKE SURE that power to the mach

ne is turned off and the motor is not

turning prior to making adjustments.

c. CHECK FOR DAMAGE to machine parts and bits prior to operations.

d. NEVER leave tool running unattended.

e. DO NOT overreach. Keep your proper footing and balance at all times.

f. MAKE SURE bit is chucked and properly rotated prior to operation.

g. DO NOT use the chisel if it is smoking in the cut.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 138 139

Pas de commentaire

Ryobi DBJ50 Instructions d'exploitation Page 96