Ryobi MS181 Manuel de l'opérateur télécharger pdf (Page 21)

Page 21

ADJUSTMENTS

Fig. 29

VIEW OF BLADE NOT SQUARE WITH MITER

TABLE, ADJUSTMENTS ARE REQUIRED

Fig. 28

VIEW OF BLADE NOT SQUARE WITH MITER

TABLE, ADJUSTMENTS ARE REQUIRED

Fig. 30

MITER TABLE

POSITIVE

STOP ADJUSTMENT

SCREW FOR 45° ANGLES

■ Retighten bevel lock knob. Next, retighten lock nut

securing the positive stop adjustment screw.

Recheck blade-to-table alignment.

Note: The above procedure can be used to check

blade squareness of the saw blade to the miter

table at both 0° and 45° angles.

22.5

1.62

COMBINATION

SQUARE

FENCE

MITER TABLE

BLADE

22.5

31.62

22.5

31.6

COMBINATION

SQUARE

FENCE

MITER TABLE

BLADE

POSITIVE STOP

ADJUSTMENT SCREW

FOR 0° ANGLES

LOCK NUT(S)

■ If the top or bottom of the saw blade angles away

from the square as shown in figures 28 and 29,

adjustments are needed.

■ Using a 10 mm wrench or adjustable wrench,

loosen the lock nut securing positive stop adjust-

ment screw. Also loosen bevel lock knob.

■ Adjust positive stop adjustment screw to bring

saw blade into alignment with the square.

See Figure 30

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Ryobi MS181 Manuel de l'opérateur Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à onglets Ryobi MS181