Ryobi MS181 Manuel de l'opérateur télécharger pdf (Page 9)

Page 9

Your Compound Miter Saw has been shipped

completely assembled except for the battery pack,

dust bag or dust guide.

WARNING:

If any parts are missing, do not operate this tool

until the missing parts are replaced. Failure to do

so could result in possible serious personal injury.

■ Remove all loose parts from the carton. Separate

and check with the list of loose parts.

See Figure 1.

■ Remove the packing materials from around your

saw.

■ Carefully lift saw from the carton and place it on a

level work surface. Although small, this saw is

heavy. To avoid back injury, get help when

needed.

UNPACKING

■ Do not discard the packing materials until you have

carefully inspected the saw, identified all loose parts,

and satisfactorily operated your new saw.

■ Your saw has been shipped with the saw arm

locked in the down position. To release saw arm,

push down on top of saw arm and pull out the lock

pin.

See Figure 7.

■ Lift the saw arm by the handle. Hand pressure

should remain on the saw arm to prevent sudden

rise upon release of the lock pin.

■ Examine all parts to make sure no breakage or

damage has occurred during shipping.

If any parts are damaged or missing, do not attempt to

turn the switch on until the damaged or missing parts

are obtained and are installed correctly.

■ If any parts are damaged or missing, please

call 1-800-525-2579 for assistance.

The following tools (not included) are needed for checking adjustments of your saw or for installing the blade:

TOOLS NEEDED

FRAMING SQUARE

PHILLIPS SCREWDRIVER

17 mm COMBINATION WRENCH

10 mm COMBINATION WRENCH

COMBINATION

SQUARE

Fig. 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Ryobi MS181 Manuel de l'opérateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à onglets Ryobi MS181