Ryobi TS1300 Manuel de l'opérateur télécharger pdf (Page 10)

Page 10

Fig. 3

Fig. 4

Fig. 5

CARRYING

HANDLE

SAW ARM

LOCKED IN DOWN POSITION

SAW

ARM

MITER LOCK

HANDLE

SPINDLE LOCK BUTTON

LOCK-OFF

LEVER

PADLOCK

SWITCH

TRIGGER

SWITCH

TRIGGER

LOCK

FEATURES

MITER LOCK HANDLE

See Figure 3.

The miter lock handle securely locks your saw at desired

miter angles.

LOCK-OFF LEVER

See Figure 4.

The switch trigger is equipped with a lock-off lever to re-

duce the possibility of accidental starting. The lock-off lever

must be slid back away from the switch trigger in order to

turn saw on. Once the saw is on, the lock-off lever can be

released. The spring loaded lever will spring back into the

lock-off position when the switch trigger is released.

SPINDLE LOCK BUTTON

See Figure 4.

A spindle lock button has been provided for locking the

spindle of your saw in a stationary position. Depress and

hold the lock button while installing, changing, or removing

blade.

TRIGGER LOCK

See Figure 5.

To prevent unauthorized use of your miter saw, we suggest

that you disconnect it from the power supply and lock the

switch in the off position. To lock the switch, install a

padlock through the hole in the switch trigger. A lock with a

shackle up to 13/64 in. (5 mm) diameter may be used.

When the lock is installed and locked, the switch is

inoperable. Store the padlock key in another location.

POSITIVE STOPS ON MITER TABLE

Positive stops have been provided at 0°, 15°, 22-1/2°,

30°, and 45°. The 15°, 22-1/2°, 30°, and 45° positive

stops have been provided on both the left and right side

of the miter table.

ELECTRIC BRAKE

An electric brake has been provided to quickly stop blade

rotation after the switch is released.

FENCE

The fence on your miter saw has been provided as a

support to hold your workpiece securely against when

making all cuts.

SELF-RETRACTING LOWER BLADE GUARD

The lower blade guard is made of shock-resistant, see-

through plastic that provides protection from each side of

the blade. It retracts over the upper blade guard as the saw

is lowered into the workpiece.

WORK CLAMP (Optional)

An optional work clamp has been provided with your saw. It

provides one means of clamping the workpiece to the fence.

Clamping secures the work and prevents the workpiece

from creeping toward the saw blade. This is very helpful

when cutting miters.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Ryobi TS1300 Manuel de l'opérateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à onglets Ryobi TS1300