Ryobi P731 Manuel de l'opérateur télécharger pdf (Page 8)

8 — English

OPERATION

WARNING:

Do not allow familiarity with this product to make you

careless. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes resulting in possible

serious injury.

WARNING:

Do not use any attachments or accessories not

recommended by the manufacturer of this tool. The use

of attachments or accessories not recommended can

result in serious personal injury.

WARNING:

Do not leave items to be inflated unattended while infla-

tor is in use. These items can burst and could cause

serious injury.

CAUTION:

The inflator is not designed for continuous use. For every

ten minutes of inflator use, ten minutes of cool down time

are required.

WARNING:

Since the pressure gauge is not calibrated, and is

therefore not binding for exact values, tire pressure

must be checked using a reliable measuring device be-

fore driving a vehicle with vehicle tires inflated with the

inflator. Driving a vehicle with improperly inflated tires

could result in serious injury.

CAUTION:

The inflator is capable of inflating to 150 PSI, 10.3 BAR, or

1030 kPa. To avoid over inflation, carefully follow instruc-

tions on items to be inflated. To avoid product damage,

never exceed recommended pressures.

APPLICATIONS

You may use this inflator for the purpose listed below:

Inflating high pressure items like motorcycle, car, and

bicycle tires

Inflating and deflating low pressure items like air mat-

tresses, rafts and floats

NOTE: The inflator is not designed for commercial application.

This product will accept Ryobi One+ 18 V lithium-ion battery

packs and Ryobi One+ 18 V nickel-cadmium battery packs.

For complete charging instructions, refer to the Operator’s

Manuals for your Ryobi One+ battery pack and charger

models.

BATTERY PROTECTION FEATURES

Ryobi lithium-ion batteries are designed with features that

protect the lithium-ion cells and maximize battery life.

If the product stops during use, the battery needs to be

recharged.

TO INSTALL/REMOVE BATTERY PACK

See Figure 2, page 12.

WARNING:

Always remove battery pack from your tool when you are

assembling parts, making adjustments, cleaning, or when

not in use. Removing battery pack will prevent accidental

starting that could cause serious personal injury.

To install:

Place the battery pack in the tool. Align the raised rib on

the battery pack with groove in the battery port.

Make sure the latches on each side of the battery pack

snap in place and that the battery pack is secured in the

tool before beginning operation.

To remove:

Depress the latches on both sides of the battery pack to

release the battery pack and remove it from the tool.

WARNING:

Improperly attached hoses or accessories can become

detached under pressure and cause serious injury.

Possible air leaks can cause faulty pressure readings.

Make sure all connections are tightly secured.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Ryobi P731 Manuel de l'opérateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Électronique des véhicules automobiles Ryobi P731