Ryobi P360 Manuel d'utilisation et d'entretien télécharger pdf (Page 3)

3 — English

GENERAL POWER TOOL SAFETY WARNINGS

Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

BATTERY TOOL USE AND CARE

Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another battery pack.

Use power tools only with specifically designated

battery packs. Use of any other battery packs may create

a risk of injury and fire.

When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

SERVICE

Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

When servicing a power tool, use only identical

replacement parts. Follow instructions in the

Maintenance section of this manual. Use of unauthorized

parts or failure to follow Maintenance instructions may

create a risk of shock or injury.

Always assume that the tool contains fasteners. Care-

less handling of the stapler can result in unexpected firing

of staples and personal injury.

Do not point the tool towards yourself or anyone

nearby. Unexpected triggering will discharge the staple

causing an injury.

Do not actuate the tool unless the tool is placed firmly

against the workpiece. If the tool is not in contact with

the workpiece, the staple may be deflected away from

your target.

Disconnect the tool from the power source when the

fastener jams in the tool. While removing a jammed

fastener, the tacker may be accidentally activated if it is

plugged in.

Use caution while removing a jammed staple. The

mechanism may be under compression and the staple

may be forcefully discharged while attempting to free a

jammed condition.

Do not use this tool for fastening electrical cables.

It is not designed for electric cable installation and may

damage the insulation of electric cables thereby causing

electric shock or fire hazards.

Hold power tool by insulated gripping surfaces, when

performing an operation where the fastener may con-

tact hidden wiring. Fasteners contacting a “live” wire

may make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

Know your power tool. Read operator’s manual care-

fully. Learn its applications and limitations, as well as

the specific potential hazards related to this power

tool. Following this rule will reduce the risk of electric

shock, fire, or serious injury.

Always wear eye protection with side shields marked

to comply with ANSI Z87.1. Everyday glasses have only

impact resistant lenses. They are not safety glasses. Fol-

lowing this rule will reduce the risk of serious personal

injury.

Eye protection which conforms to ANSI specifications

and provides protection against flying particles both

from the FRONT and SIDE should ALWAYS be worn

by the operator and others in the work area when

loading, operating or servicing this tool. Eye protection

is required to guard against flying fasteners and debris,

which could cause severe eye injury.

The employer and/or user must ensure that proper

eye protection is worn. We recommend Wide Vision

Safety Mask for use over eyeglasses or standard safety

glasses that provide protection against flying particles

both from the front and side. Always use eye protection

which is marked to comply with ANSI Z87.1.

STAPLER SAFETY WARNINGS

1 2 3 4 5 6 7 8 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Ryobi P360 Manuel d'utilisation et d'entretien Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Pistolet à clous Ryobi P360