Ryobi P360 Manuel d'utilisation et d'entretien télécharger pdf (Page 4)

4 — English

STAPLER SAFETY WARNINGS

Additional safety protection will be required in some

environments. For example, the working area may in-

clude exposure to noise level which can lead to hearing

damage. The employer and user must ensure that any

necessary hearing protection is provided and used by the

operator and others in the work area. Some environments

will require the use of head protection equipment. When

required, the employer and user must ensure that head

protection conforming to ANSI Z89.1-1997 is used.



Keep fingers away from trigger when not driving fasten-

ers to avoid accidental firing

Use safety equipment. Always wear eye protection.

Dust mask, nonskid safety shoes, hard hat, or hearing

protection must be used for appropriate conditions.

Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule will reduce the

risk of serious personal injury.

Protect your hearing. Wear hearing protection during

extended periods of operation. Following this rule will

reduce the risk of serious personal injury.

Battery tools do not have to be plugged into an elec-

trical outlet; therefore, they are always in operating

condition. Be aware of possible hazards when not

using your battery tool or when changing accessories.

Following this rule will reduce the risk of electric shock,

fire, or serious personal injury.

Do not place battery tools or their batteries near fire

or heat. This will reduce the risk of explosion and pos-

sibly injury.

Use the tool only for its intended use. Do not discharge

fasteners into open air.

Use the tool only for the purpose for which it was

designed.

Use only the staples recommended for this tool. Use

of the wrong staples could result in poor staple feeding,

jammed staples, and staples leaving the tool at erratic

angles. If staples are not feeding smoothly and properly,

discontinue their use immediately. Jammed and improp-

erly feeding staples could result in serious personal injury.

Never use this tool in a manner that could cause a

fastener to be directed toward anything other than

the workpiece.

Do not use the tool as a hammer.

Always carry the tool by the handle.

Do not alter or modify this tool from the original design

or function without approval from the manufacturer.

Always be aware that misuse and improper handling

of this tool can cause injury to yourself and others.

Never clamp or tape the trigger or workpiece contact

in an actuated position.

Never leave tool unattended if the battery is installed.

Do not operate this tool if it does not contain a legible

warning label.

 Keep the tool and its handle dry, clean and free from

oil and grease. Always use a clean cloth when clean-

ing. Never use brake fluids, gasoline, petroleum-based

products, or any strong solvents to clean your tool. Fol-

lowing this rule will reduce the risk of loss of control and

deterioration of the enclosure plastic.

OPERATION

Do not use tool if trigger does not actuate properly.

Any tool that cannot be controlled with the trigger is

dangerous and must be repaired.

Check operation of the workpiece contact mechanism

frequently. Do not use the tool if the workpiece contact

mechanism is not working correctly as accidental driving

of a fastener may result. Do not interfere with the proper

operation of the workpiece contact mechanism.

Do not use a tool that does not work correctly.

Always assume that the tool contains fasteners.

Do not carry the tool from place to place holding the

trigger. Accidental discharge could result.

Always handle the tool with care:

• Respect the tool as a working implement.

• Never engage in horseplay.

• Never pull the trigger unless nose is directed toward the

work.

• Keep others a safe distance from the tool while tool is in

operation as accidental actuation may occur, possibly

causing injury.

Choice of triggering method is important. Check

manual for triggering options.

The stapler is designed for single-hand use. Do not

hold the tool by the front of the magazine. Do not put

hands, head, or other parts of your body near the bottom

of the magazine where the staple exits the tool, as serious

personal injury could result.

Do not point the tool toward yourself or anyone

whether it contains fasteners or not.

Do not actuate the tool unless you intend to drive a

fastener into the workpiece.

Always ensure that the workpiece contact is fully posi-

tioned above the workpiece. Positioning the workpiece

contact only partially above the workpiece could cause

the fastener to miss the workpiece completely and result

in serious personal injury.

1 2 3 4 5 6 7 8 9 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Ryobi P360 Manuel d'utilisation et d'entretien Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Pistolet à clous Ryobi P360