Ryobi P360 Manuel d'utilisation et d'entretien télécharger pdf (Page 5)

5 — English

Do not drive fasteners near edge of material. The

workpiece may split causing the fastener to ricochet,

injuring you or a co-worker. Be aware that the fastener

may follow the grain of the wood, causing it to protrude

unexpectedly from the side of the work material or de-

flect, possibly causing injury.

Keep hands and body parts clear of immediate work

area. Hold workpiece with clamps when necessary to

keep hands and body out of potential harm. Be sure the

workpiece is properly secured before pressing the fas-

tener against the material. The workpiece contact may

cause the work material to shift unexpectedly.

Keep face and body parts away from back of the tool

cap when working in restricted areas. Sudden recoil

can result in impact to the body, especially when driving

fasteners into hard or dense material.

During normal use the tool will recoil immediately

after driving a fastener. This is a normal function of

the tool. Do not attempt to prevent the recoil by holding

the stapler against the work. Restriction to the recoil can

result in a second fastener being driven from the stapler.

Grip the handle firmly, let the tool do the work and do not

place second hand on top of tool or near exhaust at any

time. Failure to heed this warning can result in serious

personal injury.

Do not drive fasteners on top of other fasteners or with

the tool at an overly steep angle as this may cause

deflection of fasteners which could cause injury.

LOADING TOOL

Do not load the tool with fasteners when any one of the

operating controls is activated.

When loading tool:

Never place a hand or any part of body in fastener dis-

charge area of tool.

Never point tool at anyone.

Do not pull the trigger or depress the workpiece contact

as accidental actuation may occur, possibly causing

injury.

SAVE THESE INSTRUCTIONS

 Refer to them frequently and use them to instruct others

who may use this tool. If you loan someone this tool, loan

them these instructions also.

STAPLER SAFETY WARNINGS

WARNING:

This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities

may contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other

reproductive harm. Wash hands after handling.

Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products and,

• arsenic and chromium from chemically treated lumber.

Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your

exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially

designed to filter out microscopic particles.

CALIFORNIA PROPOSITION 65

1 2 3 4 5 6 7 8 9 10 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Ryobi P360 Manuel d'utilisation et d'entretien Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Pistolet à clous Ryobi P360