Ryobi YG250FS Manuel d'utilisation et d'entretien télécharger pdf (Page 6)

6 — English

GLOSSARY OF TERMS

Activate (operating controls)

To move an operating control so that it is in a position

that allows the tool to be actuated or that satisifes one

requirement for the tool to be actuated.

Actuate (tool)

To cause movement of the tool component(s) intended to

drive a fastener.

Air inlet port

In an air tool, the opening to which the compressed air supply

is connected, usually by means of a threaded fitting.

Fastener

A staple, pin, brad, nail, or other fastening device which is

designed and manufactured for use in the tools within the

scope of this standard.

Jam

An obstruction in the feed or drive areas of the tool.

Maximum air pressure

The maximum allowable pressure of the compressed air, as

specified by the manufacturer, for operating a tool.

Operating control

A control that separately, or as part of an actuation system,

can cause the actuation of a tool.

Single sequential actuation

An actuation system in which there is more than one operating

control and the operating controls must be activated in a

specific sequence to actuate the tool. Additional actuation

can occur when a specific operating control, other than a

workpiece contact, is released and re-activated.

Trigger

A tool operating control activated by a tool operator’s fingers.

Workpiece

The intended object into which a fastener is to be driven

by a tool.

Workpiece contact

An operating control element or assembly on the tool

intended to be activated by the material to be fastened.

FEATURES

PRODUCT SPECIFICATIONS

Operating Pressure.............................................70-120 psi

Fastener Type ..................................... 16 gauge finish nails

Fastener Range ..........................................1 in. to 2-1/2 in.

Magazine Capacity ................................................ 110 nails

Air Consumption.............................0.09 ft3/cycle at 100psi

Air Inlet .............................................................. 1/4 in. NPT

Weight ..................................................................... 4.2 lbs.

ASSEMBLY

WARNING:

Do not use this product if it is not completely assembled

or if any parts appear to be missing or damaged. Use of

a product that is not properly and completely assembled

or with damaged or missing parts could result in serious

personal injury.

WARNING:

Do not attempt to modify this product or create

accessories or attachments not recommended for use

with this product. Any such alteration or modification is

misuse and could result in a hazardous condition leading

to possible serious personal injury.

If any parts are damaged or missing, please call 1-800-525-2579 for assistance.

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Commentaires sur ces manuels

[email protected] 22 Jan 2024 | 07:34:05

Plunger won't return

Ryobi YG250FS Manuel d'utilisation et d'entretien Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Pistolet à clous Ryobi YG250FS