Ryobi YN200BND Manuel de l'opérateur télécharger pdf (Page 5)

5 - English

During normal use the tool will recoil immediately after

driving a fastener. This is a normal function of the tool.

Do not attempt to prevent the recoil by holding the nailer

against the work. Restriction to the recoil can result in

a second fastener being driven from the nailer. Grip the

handle firmly and let the tool do the work. Failure to heed

this warning can result in serious personal injury.

Do not drive fasteners on top of other fasteners or with

the tool at an overly steep angle as this may cause

deflection of fasteners which could cause injury.

Do not drive fasteners close to the edge of the

workpiece as the wood may split, allowing the fas-

tener to be deflected possibly causing injury.

AIR SUPPLY AND CONNECTIONS

Do not use oxygen, combustible gases or bottled

gases as a power source for this tool as tool will ex-

plode, possibly causing injury or death.

Do not use with an air compressor which can po-

tentially exceed 200 psi as tool may burst, possibly

causing injury.

The connector on the tool must not hold pressure

when air supply is disconnected. If an incorrect fitting

is used, the tool can remain charged with air after discon-

necting and thus will be able to drive a fastener even after

the air line is disconnected, possibly causing injury.

Always disconnect air supply:

• Beforemakingadjustments

• Whenservicingthetool

•Whenclearingajam

• Whentoolisnotinuse

• Whenmovingtoadifferentworkarea,asaccidental

actuation may occur, possibly causing injury.

LOADING TOOL

Do not load the tool with fasteners when any one of

the operating controls is activated.

When loading tool:

Never place a hand or any part of body in fastener

discharge area of tool.

Never point tool at anyone.

Do not pull the trigger or depress the workpiece

contact as accidental actuation may occur, possibly

causing injury.

SAVE THESE INSTRUCTIONS

Refer to them frequently and use them to instruct others

who may use this tool. If you loan someone this tool, loan

them these instructions also.

SPECIFIC SAFETY RULES

1 2 3 4 5 6 7 8 9 10 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Ryobi YN200BND Manuel de l'opérateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Pistolet à clous Ryobi YN200BND