Ryobi ERT2100VK Guide de l'utilisateur télécharger pdf (Page 14)

285

SectionAccessories & Hardware

*SAVE with a bulk discount – see online axminster.co.uk or call 03332 406406

Threaded metal inserts are simple but

useful items for making accurate and

useful jigs for workshop use. To insert, drill hole to size, 8mm

for the M6 or 10mm for the M8. The larger M8 insert taps into

place and the smaller M6 version threads in by using a hex key.

Available in packs of 10.

Threaded Metal

Inserts for Wood

M6 Inserts (8mm Hole) (Pkt 10) £2.64 £2.20 510240

M8 Inserts (10mm Hole) (Pkt 10) £3.84 £3.20 510241

Inc.vat Ex.vat Code

Threaded pronged ‘T’ nuts are simple but useful items for making

accurate and useful jigs for use in the workshop. To insert, drill

hole to size, 8mm for the M6, 10mm for the M8 and 12mm for the

M10 and gently tap home. Packs of 10.

M6 Nuts (8mm O/D) (Pkt 10) £2.45 £2.04 800402

M8 Nuts (10mm O/D) (Pkt 10) £2.54 £2.12 800403

M10 Nuts (12mm O/D) (Pkt 10) £2.94 £2.45 800401

Inc.vat Ex.vat Code

Threaded

Pronged ‘T’ Nuts

Threaded pronged ‘T’ nuts are simple but useful items for making

M8 Insert

M6 Insert

This clamp is an integral component included with our Axminster

kitchen worktop jigs. We think that it would be so useful for

other applications that we are now offering it as a separate

product. If you make your own routing jigs, this clamp becomes

indispensible for holding the jig down onto the workpiece, while

allowing the router to pass over the top of it, due to its clever

design. Simply cut a slot in the jig for the narrow stem of the

clamp head and a shallow recess for the wider top part and this

will allow unhindered routing on the top of the jig.

Mounting Clamp £5.95 £4.96 718700

Inc.vat Ex.vat Code

Axminster Flush

Mounting Clamp

Bessey Self Adjusting

Toggle Clamp

Self Adjusting Toggle Clamp 0 to 45mm £19.74 £16.45 502275

Self Adjusting Toggle Clamp 0 to 65mm £19.94 £16.62 502276

Inc.vat Ex.vat Code

Threaded metal inserts are simple but

useful items for making accurate and

useful jigs for workshop use. To insert, drill hole to size, 8mm

Threaded Metal

Inserts for Wood

A very useful section of aluminium T-Track which can be utilised

for all manner of routing jigs, clamps and devices. The external

measurements are 19 x 9.5mm deep, the slot is 8.9 x 6.4mm deep

and the T-section is 13.6mm wide. Available in 610mm(24”) or

915mm(36”) lengths.

T-Track 610mm £5.95 £4.96 502716

T-Track 915mm £7.45 £6.21 502717

Hold Down Clamp £5.35 £4.46 502715

Inc.vat Ex.vat Code

UJK Technology Universal T-Track

A very useful section of aluminium T-Track which can be utilised

for all manner of routing jigs, clamps and devices. The unique

14° dovetail shaped section makes the track extremely useful for

jig making, especially if a clamping action is pulling against the

track. The external measurements overall are 915mm(36”) long,

23 x 9.5mm deep, the slot is 8.9 x 7mm deep and the T-section is

13.6mm wide.

Dovetailed T-Track 915mm £9.95 £8.29 502712

Hold Down Clamp £5.35 £4.46 502715

Inc.vat Ex.vat Code

UJK

Technology

Dovetailed

T-Track

A very useful standard mitre slot track but with a unique 14°

dovetail shaped section which offers extra security for attaching

the track. The external measurements overall are 915mm(36”)

long, 31 x 12.7mm deep and the slot is 19 x 9.7mm deep. These

tracks would be useful if making up your own router table or

other applications where a mitre fence is used.

UJK Technology

Dovetailed Mitre

Slot Track

Dovetailed Mitre Track 915mm £9.95 £8.29 502713

Inc.vat Ex.vat Code

The UJK Technology mitre slot bar is a solid aluminium section

designed to ﬁ t the standard 19mm mitre slot in your machine

table. Overall dimensions are 457 x 9.5 x 19mm wide. There are

four grub screws spaced equally along the length of the bar to

ﬁ ne tune the sliding ﬁ t of the bar in your machine table slot. Three

1/4” whitworth threaded holes are spaced equidistant along

the length to accommodate any jigs and ﬁ xtures that you wish

to attach. A very useful accessory for either saw tables or router

tables where jigs for repeated operations help to speed up the

production of machined components. N.B. 1/4” Whitworth bolts

will need to be sourced separately.

Mitre Slot Bar 457mm £9.95 £8.29 502714

Inc.vat Ex.vat Code

UJK Technology

Mitre Slot Bar

• Automatically adjusts to the clamping height

• Clamping force is variable up to 2,500 N

• Sturdy, tempered steel for a long service life

• Swivel clamp shoe with plastic protector

• High-quality, wide, two-component plastic

• Choose 0 to 45mm or 0 to 65mm capacities

When the clamp is locked, the handle is

in the vertical position.

20mm (Holds 50kg) £5.24 £4.37 500314

35mm (Holds 100kg) £5.54 £4.62 500315

45mm (Holds 180kg) £6.84 £5.70 500316

62mm (Holds 250kg) £7.94 £6.62 378001

75mm (Holds 360kg) £9.95 £8.29 500317

Inc.vat Ex.vat Code

Toggle Clamp Type A

Inc.vat

Ex.vat Code

When the clamp is locked, the handle is

in the horizontal position.

15-35mm (Holds 50kg) £5.45 £4.54 810468

15-50mm (Holds 90kg) £5.54 £4.62 500319

30-65mm (Holds 227kg) £5.94 £4.95 500321

35-95mm (Holds 340kg) £8.24 £6.87 500320

Inc.vat Ex.vat Code

Toggle Clamp Type B

Technology

Dovetailed

Inc.vat

UJK Technology

Threaded pronged ‘T’ nuts are simple but useful items for making

accurate and useful jigs for use in the workshop. To insert, drill

hole to size, 8mm for the M6, 10mm for the M8 and 12mm for the

M10 and gently tap home. Packs of 10.

A simple piston action with

20mm travel operated with

handle in the horizontal position.

20mm Travel £9.74 £8.12 810469

Inc.vat Ex.vat Code

Toggle Clamp Type C

handle in the horizontal position.

Inc.vat

Ex.vat Code

Toggle Clamp Type C

This Bessey self adjusting toggle clamp allows movement of the

handle to be converted into an axial movement of the push/

pull rod. It has automatic distance adjustment up to 16mm with

unchanged clamping force without manual changes. A set screw,

on the cantilevered joint, adjusts the clamping force to your

particular needs: 10mm up to 1,100N and 16mm up to 2,500N.

The injection moulded handle is broad which makes setting the

clamp a comfortable operation.

Push/Pull 0-10mm Length 181mm £20.94 £17.45 503893

Push/Pull 0-16mm Length 225mm £21.95 £18.29 503894

Inc.vat Ex.vat Code

Bessey Self Adjusting Push Pull

Toggle Clamp

This Bessey self adjusting toggle clamp automatically adjusts

to the height of your workpiece within a 20mm range, whilst

the clamping force remains unchanged. This means the ﬁ ddly

manual adjustment of the pressure screw is a thing of the past. A

set screw, on the cantilevered joint, adjusts the clamping force to

your particular needs, up to 1,100N. The clamp is mounted with

the angled baseplate. The injection moulded handle is broad

which makes setting the clamp a comfortable operation. As a

result they are perfectly suited for use in small-scale production

situations. In clamped position the handle is horizontal.

Toggle Clamp Angled Base £19.94 £16.62 503892

Inc.vat Ex.vat Code

Bessey Self Adjusting Hold Down

Toggle Clamp Angled Base

Bessey Self Adjusting Hold Down

07_Routing 272_299.indd 285 29/11/2013 11:40

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Ryobi ERT2100VK Guide de l'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Ryobi ERT2100VK