Ryobi ERT2100VK Guide de l'utilisateur télécharger pdf (Page 17)

288

Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95Call 03332 406406

Router Tables

Featherboards

The UJK Technology compact router tables are solid, dependable

units that should give many years of useful service. Three table

top options are available in cast iron, phenolic and MDF, all

sharing the same fence and leg stand. The beneﬁ ts of using

cast iron for the manufacture of machine tables are well known

especially where vibration damping and stability are paramount.

The cast iron 686 x 406 x 40mm top is ﬁ nely ground offering

minimum resistance to the workpiece as it is passed over the

surface. The slightly smaller 600 x 400 x 22mm phenolic top is

a great choice especially if your workshop or shed suffers from

dampness or condensation. This very stable material is also used

in the manufacture of our worktop jigs. Finally, the 600 x 400 x

32mm MDF top version is our great value option for the cost

conscious woodworker. If you don’t have room in your workshop

for a full sized router table then the ‘compact’ would be a great

choice. There are many complex routing operations that can only

be carried out using a table set-up and, although smaller than

its bigger brothers, these little gems still offer some excellent

features. The aperture in the table top is designed to accept the

UJK router elevator and a range of other dedicated insert options.

The fence is a beautifully made, single piece aluminium section

supplied with a transparent dust port for efﬁ cient extraction

from above the table. Provision is made for the ﬁ tting of guards

and accessories with a T-slot at both the top and front of the

fence. An adjustable transparent guard is included for your safety.

Adjustable scales are provided for attachment at either side of

the table and the fence is attached to these and locks into place

in the required position. A scale is also provided for the top of the

fence with the zero position at the centre. Adjustable in-feed and

out-feed fences attach to either side of the aluminium section

and the central aperture can be opened and closed according to

the diameter of the cutter in use. Measures 789 x 90mm.

The compact leg stand is of sturdy construction and provision

is made for storage of the supplied mitre fence assembly.

Measuring 370mm high, with a footprint of 580 x 390mm, this leg

stand is such a useful size and could also be used for mounting

many other machines.

The UJK Technology professional router table is a solid,

dependable unit that will give many years of useful service. The

beneﬁ ts of using cast iron for the manufacture of machine tables

are well known especially where vibration damping and stability

are paramount. The quality of the surface grinding on this table

is superb, offering little resistance when passing stock across the

table during use. If you have room in your workshop for a full

sized router table, you will wonder how you managed without

one. There are many complex routing operations that can only

be carried out using a table set-up. The aperture in the table top

is designed to accept our router elevator and when ﬁ tted with

this unit you will have yourself an excellent versatile set-up. Top

measures 812 x 610mm.

The fence is a superb quality single aluminium section supplied

with a transparent dust port for efﬁ cient extraction from

above the table. Provision is made for the ﬁ tting of guards and

accessories with a T-slot at both the top and front of the fence.

An adjustable transparent guard is included for your safety.

Adjustable scales are provided for attachment at either side of

the table and the fence is attached to these and locks into place

at the required position. A scale is also provided for the top of the

fence with the zero position at the centre. Adjustable in-feed and

out-feed fences attach to either side of the aluminium section and

the central aperture can be opened and closed according to the

diameter of the cutter in use. Fence measures 904 x 90mm high.

The UJK Technology ‘professional’ leg stand is of sturdy

construction with a foot operated retractable castor for excellent

mobility around the workshop. A neat rack is provided for keeping

your most popular router cutters to hand and provision is made

for storage of the supplied mitre fence assembly. Stand height

including cast iron top 930mm.

Horizontal Featherboards (Pair) £12.95 £10.79 502750

Inc.vat Ex.vat Code

UJK Technology

Professional Router Tables

Featherboards are a great accessory for the safe and efﬁ cient

use of router tables, circular saws and spindle moulders. The

Axminster arched featherboard offers increased functionality

for the machining of wider boards and is well suited for use on

a router table set-up. This clever robust design also acts as an

efﬁ cient guard during use and has a natural tendency to pull the

material towards the fence. Dimensions are 260 x 115 x 60mm

and the vertical slots are 238mm between centres.

Arched Featherboard £7.25 £6.04 950028

Inc.vat Ex.vat Code

Axminster

Arched

Featherboard

Featherboards are a great accessory for the safe and efﬁ cient

Optional dust extraction

box available

Shown with

optional UJK

dust extraction

box ﬁ tted (not

included)

Compact Phenolic £264.96 £220.80 717206

Compact MDF £229.96 £191.63 717207

Compact Cast Iron £284.95 £237.46 717126

Inc.vat Ex.vat Code

UJK Technology

Compact Router Tables

Professional Phenolic £399.95 £333.29 717204

Professional MDF £309.95 £258.29 717205

Professional Cast Iron £449.95 £374.96 717127

Inc.vat Ex.vat Code

Shown with

optional UJK

dust extraction

box ﬁ tted (not

Graduated adjustment

scale supplied with fence

Featherboards are an excellent accessory for safer routing. They

simply attach to your router table with the supplied T-bolts and

provide extra support for the workpiece as it is being passed

across the cutter. The amount of applied pressure is sustained over

a wide area so you are less likely to experience breakout or chatter

on the workpiece. The UJK Technology horizontal featherboards

can be used as singles at either side of the cutter or doubled up

for extra support when machining a larger section of timber. Each

featherboard offers 20mm depth of support and when stacked

together, using the supplied spacers, the depth increases to 66mm.

UJK Technology Double

Horizontal Featherboards

Compact Cast Iron

These featherboards are an excellent accessory for safer routing.

They simply attach to your router table fence with the supplied

T-bolts and provide extra support for the workpiece as it is being

passed across the cutter. The amount of applied pressure is sustained

over a wide area so you are less likely to experience breakout or

chatter on the workpiece. The UJK Technology vertical featherboards

should be positioned at each side of the cutter offering downward

pressure on both the infeed and outfeed sides of the table.

Vertical Featherboards (Pair) £8.45 £7.04 502751

Inc.vat Ex.vat Code

UJK Technology

Vertical

Featherboards

These featherboards are an excellent accessory for safer routing.

UJK Technology

07_Routing 272_299.indd 288 29/11/2013 11:44

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Ryobi ERT2100VK Guide de l'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Ryobi ERT2100VK