Ryobi ERT2100VK Guide de l'utilisateur télécharger pdf (Page 21)

292

Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95Call 03332 406406

Axcaliber TCT Router Cutters All dimensions in mm

25.4 12.7 3.175 £22.94 £19.12 666169

30.16 11 45° £16.94 £14.12 666158

36.5 14.5 45° £21.44 £17.87 666159

19 15.93 6.35 £15.95 £13.29 666035

25.4 19.1 9.525 £18.44 £15.37 666036

15.88 9.53 1.59 £16.44 £13.70 666046

19.05 9.53 3.2 £16.44 £13.70 666047

20.64 9.53 3.96 £17.45 £14.54 666048

22.2 9.53 4.76 £17.94 £14.95 666049

25.4 11.11 6.35 £19.44 £16.20 666050

28.58 12.7 7.94 £19.94 £16.62 666051

31.75 15.88 9.53 £21.95 £18.29 666052

38.1 19.05 12.7 £24.95 £20.79 666053

34.93 15.88 12.7 £22.94 £19.12 666156

3.175 7.94 1.6 1 £9.44 £7.87 666005

4.76 7.94 2.38 1 £9.44 £7.87 666006

6.35 7.94 3.175 2 £10.94 £9.12 666007

9.53 12.7 4.765 2 £11.94 £9.95 666008

12.7 15.88 6.35 2 £13.44 £11.20 666009

15.88 15.88 7.94 2 £14.94 £12.45 666010

19.05 19.05 9.525 2 £16.94 £14.12 666011

12.7 12.7 6.35 £14.94 £12.45 666043

D X R Inc.vat Ex.vat Code

Indispensable for use with

templates, this cutter could

be used for coves on picture

frames, wooden draining boards

or deﬁ ning panelled areas on

sheet materials.

1/4” (6.35mm) Shank

Axcaliber Bearing Guided

Round Nose Router

Cutter - 1/4”(6.35mm)

D X R Flute Inc.vat Ex.vat Code

25.4 19 12.7 2 £19.94 £16.62 666273

31.75 19.05 15.875 2 £21.74 £18.12 666274

38.1 22.22 19.05 2 £25.94 £21.62 666003

50 31.7 25.4 2 £35.94 £29.95 666004

12.7 31.75 6.35 2 £20.94 £17.45 952563

D X R Flute Inc.vat Ex.vat Code

A good selection of single ﬂ ute and

twin ﬂ ute cutters which are excellent

for cutting coves in draining boards,

decorative work on furniture or the

edge moulding of timber components.

1/2” (12.7mm) Shank

1/4” (6.35mm) Shank

Axcaliber Round

Nose/Radius

Router Cutters

34.93 15.88 12.7 £22.94 £19.12 666157

D X R Inc.vat Ex.vat Code

A simple cove moulding can

make an attractive feature when

used for enhancing furniture,

trim around cupboards or

laminate ﬂ ooring. This 1/2”

radius bearing guided cutter is

available in either 1/4” or 1/2”

shank sizes.

1/2” (12.7mm) Shank

1/4” (6.35mm) Shank

Axcaliber Bearing

Guided Cove

Router Cutters

1/4” (6.35mm) Shank

Axcaliber Ovolo

Router Cutters

D X R Inc.vat Ex.vat Code

31.75 15.88 9.53 £21.95 £18.29 666054

38 19 12.7 £24.95 £20.79 666055

44.5 22.2 16 £29.94 £24.95 666149

50.8 25.4 19 £34.94 £29.12 666150

D X R Inc.vat Ex.vat Code

9.525 4.76 3.175 £3.65 £3.04 666236

12.7 4.76 5 £3.65 £3.04 666238

D X R Inc.vat Ex.vat Code

The ovolo moulding is widely

used in many joinery and

furniture applications and these

are among our most popular

moulding cutters. These versatile

dual purpose cutters are supplied

with two bearings for both ovolo

and roundover use. Available in

a range of radii with a choice of

1/4” or 1/2” shank sizes.

1/2” (12.7mm) Shank

Bearings

Axcaliber Bead

Ovolo Router Cutter-

1/4”(6.35mm)

28.58 12.7 3.97 £20.94 £17.45 666151

D X R Inc.vat Ex.vat Code

A variation on the standard ovolo

cutter adding a double bead to the

moulding. Suitable for straight or

curved work as the bearing will follow

the contours of the workpiece.

1/4” (6.35mm) Shank

9.525 4.76 3.175 £3.65

£3.04 666236

12.7 4.76 5 £3.65

£3.04 666238

Axcaliber

Round Over

Router Cutters

D X R Inc.vat Ex.vat Code

34.93 25.45 12.7 £25.94 £21.62 666037

D X R Inc.vat Ex.vat Code

A range of roundover proﬁ le cutters

offering three of the most popular

radii. As these cutters are not

bearing guided, they would need

to be used with a side fence for

hand held use or used inverted in a

router table utilising the fence.

1/4” (6.35mm) Shank

1/2” (12.7mm) Shank

35 14.3 4.8 £25.44 £21.20 666167

D X R Inc.vat Ex.vat Code

A nicely shaped bearing

guided 1/4”(6.3mm)

shank ogee ﬁ llet

cutter suitable for the

manufacture of furniture

plinths, cornices and

many other decorative

components.

1/4” (6.35mm) Shank

Axcaliber

Bearing Guided

Ogee Fillet

Router Cutter

D X K˚ Inc.vat Ex.vat Code

41.3 17 45° £22.94 £19.12 666160

47.6 20 45° £27.95 £23.29 666161

D X K˚ Inc.vat Ex.vat Code

One of the most useful cutters to have

in your collection, the 45° chamfer

cutters are excellent for just removing

the sharp edges from your joinery

work or making a wider more deﬁ ned

chamfer. Bearing guided cutters are an

asset for curved work, as the cutter will

follow the shape of the workpiece.

1/2” (12.7mm) Shank

1/4” (6.35mm) Shank

Axcaliber Bearing

Guided Chamfer

Router Cutters

34.92 16.8 6.35 £22.44 £18.70 666165

D X R Inc.vat Ex.vat Code

The Ogee mould or Cyma Reversa

consists of a concave arc ﬂ owing into a

convex arc. It has been widely used in

ancient architecture and is commonly

used on the plinths and cornices of ﬁ ne

furniture. This cutter is bearing guided

making it suitable for curved or straight

sections of moulding.

1/2” (12.7mm) Shank

Axcaliber Bearing

Guided Roman

Ogee Router Cutter

38.1 19.05 6.35 £29.45 £24.54 666171

D X R Inc.vat Ex.vat Code

Similar to the Roman ogee cutter, this

one introduces a small ﬁ llet between

the two radii which gives a variation

on the standard ogee moulding. Used

for similar applications to the standard

ogee it is also bearing guided.

1/2” (12.7mm) Shank

1/4” (6.35mm) Shank

Axcaliber Bearing

Guided Classic

Roman Ogee

Router Cutter - 1/2”

A nicely proportioned cutter which

will produce a beautiful classic ogee

proﬁ le suitable for many applications

in joinery or furniture making.

Suitable for free hand or router table

use, the bottom bearing allows curved

or straight work to be undertaken.

Axcaliber Bearing

Guided Ogee Router

Cutter

44.45 12.7 9.5 15.88 £34.94 £29.12 951299

D X R H Inc.vat Ex.vat Code

1/2” (12.7mm) Shank

07_Routing 272_299.indd 292 29/11/2013 11:47

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

Ryobi ERT2100VK Guide de l'utilisateur Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Ryobi ERT2100VK