Ryobi ERT2100VK Guide de l'utilisateur télécharger pdf (Page 22)

293

Order online axminster.co.uk/routing

All dimensions in mm Axcaliber TCT Router Cutters

22.2 25.6 1.98 9.5 £27.44 £22.87 666195

19.05 25.81 1.98 9.5 £22.94 £19.12 666194

19.05 16 3.2 £15.95 £13.29 666187

22.2 17.46 4.76 £18.95 £15.79 666188

25.4 22.2 6.3 £20.94 £17.45 666189

20.6 12.7 2.4 £17.45 £14.54 666056

22.2 14.3 3.2 £18.95 £15.79 666175

23.8 15.9 3.97 £20.94 £17.45 666176

25.4 17.5 4.8 £23.45 £19.54 666177

28.6 19 6.3 £25.44 £21.20 666178

38.1 17.5 6.35 £27.44 £22.87 666168

D X R Inc.vat Ex.vat Code

This cutter offers a variation

to the classic Roman ogee

cutter having the convex

and concave radii reversed

with a small ﬁ llet between

the two. Available in

1/2”(12.7mm) shank only.

1/2” (12.7mm) Shank

Axcaliber Bearing

Guided Classic

Ogee Router Cutter

This is a very attractive

moulding when used on table

edges and could be further

enhanced by using a roundover

cutter of the same radius for

the underside of the table top.

Bearing guided for curved or

straight mouldings. Available in

1/2”(12.7mm) shank only.

1/2” (12.7mm) Shank

Axcaliber French

Traditional Table

Router Cutter

38.1 15.8 3.18 £28.44 £23.70 666057

D X R Inc.vat Ex.vat Code

22.2 28.6 £24.44 £20.37 666182

D X Inc.vat Ex.vat Code

Produce three different sizes

of bead with this triple radii

cutter. A small ﬁ llet introduced

either side of the bead, can

be used to produce attractive

astragal type glazing bars used

in furniture making.

1/4” (6.35mm) Shank

Axcaliber

Multi-Radius

Beading

Router Cutter

22.4 25.4 3.175 £27.44 £22.87 666183

D X R Inc.vat Ex.vat Code

Used with either the fence or without

(self guided) this cutter produces a very

attractive triple beaded edge in one

simple pass, stopping the moulding short

creates a good looking edge for shelving.

1/4” (6.35mm) Shank

Axcaliber Convex

Multi-Bead Router

Cutter (Bearing

Guided)

Axcaliber

Victorian Torus

Moulding

Router Cutter

31.8 36.5 9.53 £33.95 £28.29 666181

D X R Inc.vat Ex.vat Code

This cutter will produce a traditional classic

moulding of the type used on skirting

boards and similar applications. Bottom

bearing guidance also allows curved work

to be carried out.

1/2” (12.7mm) Shank

Axcaliber Extended

Shank Beading Cutter

22.2 16 3.2 £32.45 £27.04 952559

D X R Inc.vat Ex.vat Code

The addition of decorative beads can add interest

to your furniture projects but it is not easy to

apply a bead set in from the edge of a rail using

a router. The traditional method was by using a

scratch stock, but by using this cutter and a router

you will tackle the job faster with consistent

results. With a 1/2” shank 76mm long this beading

cutter will allow you to position your beads inset

from the rail edge producing some attractive

design options. Also useful for producing tongue

and groove boarding with a vee groove.

1/2” (12.7mm) Shank

Axcaliber

Flute and Bead

Cutter Set

38 12 3.2 £46.94 £39.12 952566

D X R Inc.vat Ex.vat Code

This matched pair of cutters is

the perfect way to make strip

planking for dinghy or canoe

construction. The width of cut is

only 6.35mm(1/4”) so to ensure

accuracy we recommend the

use of a router table.

Round edges on boards either to size or

slightly over to create a decorative edge

moulding, ideally used in a router table

for a greater degree of accuracy.

1/2” (12.7mm) Shank

1/4” (6.35mm) Shank

Axcaliber Staff Bead &

Nosing Router Cutters

- 1/4”(6.35mm)

D X R Inc.vat Ex.vat Code

31.8 25.4 7.94 £24.44 £20.37 666190

34.9 28.2 9.5 £27.44 £22.87 666191

38.1 32 11.1 £29.94 £24.95 666192

41.3 35 12.7 £32.94 £27.45 666193

D X R Inc.vat Ex.vat Code

£24.95 666192

£27.45 666193

27 41.3 3.175 12.7 £30.95 £25.79 666196

D X R Br Inc.vat Ex.vat Code

This cutter produces a really neat moulding

that can be used as a small applied moulding

to decorate plane doors or ﬂ at panels.

1/2” (12.7mm) Shank

1/4” (6.35mm) Shank

Axcaliber

Classic

Moulding

Router Cutter

34.9 41.43 3.175 9.5 £40.94 £34.12 666197

D X R Br Inc.vat Ex.vat Code

A deeper proﬁ le than the Classic moulding,

this proﬁ le has many uses in joinery or

furniture making. Some very attractive

picture frames could also be produced

using this cutter.

1/2” (12.7mm) Shank

1/4” (6.35mm) Shank

Axcaliber

Traditional

Moulding

Router Cutter

Axcaliber Edge

Beading Router

Cutters

D X R Inc.vat Ex.vat Code

Produce decorative beaded

edges without the need for

a guide fence. By setting the

cutter carefully on both faces

of the material a fully round

corner bead can be made.

1/4” (6.35mm) Shank

31.7 25.4 8 £28.44 £23.70 666179

35 25.4 9.5 £30.95 £25.79 666180

D X R Inc.vat Ex.vat Code

1/2” (12.7mm) Shank

50. 25.4 6.35 12.7 £43.94 £36.62 666204

D X R Br Inc.vat Ex.vat Code

A good looking cutter that can

be used to decorate edges or

create an attractive moulding.

Part use of the proﬁ le can create

a classic edge moulding for

window boards or similar.

1/2” (12.7mm) Shank

Axcaliber Edge

Moulding Router

Cutter

07_Routing 272_299.indd 293 29/11/2013 11:48

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

Ryobi ERT2100VK Guide de l'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Ryobi ERT2100VK