Ryobi ERT2100VK Guide de l'utilisateur télécharger pdf (Page 28)

Section

Order online axminster.co.uk/routing

299

Router Cutter Accessories

A range of quality ball bearings suitable for bearing guided

cutters and many other applications.

Router Cutter Bearings

Available in 1/4”(6.35mm) or 1/2”(12.7mm) shank diameters,

these bearing retaining collars are supplied with a grub screw

and suitable hex key.

Router Bearing

Retaining Collar

1/4”(6.35mm) Shank £3.24 £2.70 666040

1/2”(12.7mm) Shank £3.24 £2.70 666041

Inc.vat Ex.vat Code

A real winner from Trend, a

complete kit to keep your

router cutters and collets in

pristine condition. Comprising:

DMT whetstone, Rust Buster

anti-corrosion agent, PTFE dry

lubricant, four brass wire brushes 1/4”, 8mm, 3/8”

and 1/2” to help keep the inside of your collets

perfectly clean and a 56 page booklet on how to

keep your cutters in perfect order.

Collet Care Kit £23.94 £19.95 400080

Inc.vat Ex.vat Code

Trend Cutter &

Collet Care Kit

Four brushes, used to remove deposits of resin, dust and

corrosion from the inside of collets. Made from brass to prevent

score damage. Sizes 1/4”, 8mm, 3/8” and 1/2”.

Collet Brush Kit £4.94 £4.12 400051

Inc.vat Ex.vat Code

Trend Collet Brush Kit

To keep your cutters in good un-chipped order it is necessary to

store them separately to prevent the tips from knocking against

each other. Foam cutter presenters have the advantages that they

grip the tool, display the cutters for easy selection and can be

sprayed with thin oil (i.e. MetalGuard Spray) to protect the cutters.

Use the presenter complete or cut to ﬁ t into cabinets, drawers,

racks etc. The size is 275 x 325mm and there are 50 x 1/2” and 50 x

1/4” storage holes.

Foam Presenter £12.74 £10.62 810029

Inc.vat Ex.vat Code

Router

Cutter

Presenter

Cutters not included

Although produced with router cutters in mind, these advanced

polymer mouldings are equally useful to securely grip any 1/4” or

1/2” shanked bit such as forstner of sawtooth bits. The holders can

be mounted using a single screw, either horizontally or vertically

on shelves, in drawers or cabinets. Cutter shanks are held ﬁ rmly

keeping often expensive tooling tidy, separated and out of harm’s

way. Supplied in packs of 6.

1/4”(6.35mm) Shank £2.15 £1.79 202399

1/2” Shank £3.95 £3.29 202401

Inc.vat Ex.vat Code

Router Bit Holders - Packs 6

The problem that most customers encounter when

using a router inverted in a table set-up is that,

even when fully plunged, the router collet is still

some way below the surface of the table limiting

the depth of cut. We decided that we would

produce a very accurate and precise collet extension that would

overcome this problem by using standard ER20 engineering

collets. These precision collets have the unique ability to grip

over a diameter range of 1mm without any loss of accuracy. The

Axcaliber extension is supplied with a collet suitable for 1/2”

shank cutters with collets available for 8mm, 1/4”(6.35mm) and

1/8”(3.2mm) shank sizes. A much improved grip all round the

cutter shank is provided giving safer routing with less vibration,

and the collet nut incorporates an ejection ring to release the

shank for easy cutter changes. Dimensions are 75mm overall with

body length of 40mm. N.B. Collet nut requires a 27mm spanner.

Axcaliber Router Collet

Extension (1/2” Shank)

Collet Extension £34.94 £29.12 211367

13.0mm -12.0mm (1/2”) £8.94 £7.45 910215

8.0mm - 7.0mm (8mm) £8.94 £7.45 910210

7.0mm - 6.0mm (1/4”) £8.94 £7.45 910209

4.0mm - 3.0mm (1/8”) £8.94 £7.45 910206

Combination Spanner - 27mm £10.14 £8.45 423927

Inc.vat Ex.vat Code

These precision sleeves enable 3/8”, 8mm or 1/4”

shanked cutters to be used in 1/2” collets.

Axcaliber Router Collet

Reduction Sleeves

1/2”-3/8” £3.14 £2.62 340305

1/2”-1/4” £3.14 £2.62 666079

1/2”-8mm £3.14 £2.62 340306

Inc.vat Ex.vat Code

DMT Dia-Sharp Diamond

Sharpening Card

Forget gold cards or platinum cards, get yourself a diamond card.

A credit card sized (80 x 50mm) steel plate coated on one side

with a continuous diamond surface, keep one in your wallet for

sharpening knives and tools. Available in a choice of three grades:

Coarse 325 grit = 45 micron, Fine 600 grit = 25 micron and Extra

Fine 1,200 grit = 9 micron.

Coarse 325 Grit £17.75 £14.79 410122

Fine 600 Grit £17.75 £14.79 410124

Extra Fine 1,200 Grit £17.75 £14.79 410123

Inc.vat Ex.vat Code

If you need to make up jigs for routing or sawing operations,

then this is the kit for you. It contains a comprehensive selection

of knobs and ﬁ ttings, both male and female, which offers a wide

range of jig making solutions. Kit contains 10 x 90mm tee bolts,

10 x 65mm tee bolts, 20 x 40mm tee bolts, 20 x 25mm tee bolts,

26 female knobs in various sizes, 10 male knobs with 25mm

threaded rod, 20 x 16mm diameter washers with 6mm hole, 16 x

screw in threaded inserts, 16 x spiked nut inserts. N.B. All ﬁ ttings

are threaded 1/4” Whitworth.

Jig Hardware Set £36.95 £30.79 950114

Inc.vat Ex.vat Code

Axminster 148 Piece

Jig Making Set

Router cutters, sawblades and machine

beds can be prone to resin build-up

over time especially when used with

softwoods or timbers of a resinous

nature. This can drastically reduce the

ability of the blade or cutter to perform

its task and a reliable solvent is required

that will dissolve the resin and restore

its performance. Axcaliber blade and bit

cleaner excels at dissolving resin, pitch

and adhesive residue and it also contains

rust inhibiting agents that further

prolong the life of your expensive tooling.

Available in a convenient 600ml (21 ﬂ oz)

spray bottle. Give your TCT some TLC, no

workshop should be without some.

Bit Cleaner 600ml £11.45 £9.54 951145

Inc.vat Ex.vat Code

Axcaliber Blade

and Bit Cleaner

Ideal for all woodworking

machinery and

recommended for

woodturning chucks.

Formulated to minimise

wear and reduce corrosion. Dry PTFE

based lubricating ﬁ lm, unaffected

by water, oil or solvents and will not

attract dust. (400ml).

Axcaliber Dry Lubricant £8.15 £6.79 503468

Inc.vat Ex.vat Code

Axcaliber Dry

Lubricant

6.35 3.175 2.38 £3.65 £3.04 666234

9.525 3.175 3.96 £3.65 £3.04 666235

9.525 4.76 3.175 £3.65 £3.04 666236

9.52 6.35 3.18 £3.65 £3.04 666237

12.7 4.76 5 £3.65 £3.04 666238

12.7 6.35 4.76 £3.65 £3.04 666239

15.87 6.35 5 £4.55 £3.79 666240

15.88 4.76 5 £4.34 £3.62 666241

19.05 6.35 7.14 £4.94 £4.12 666242

19.05 12.7 5 £4.94 £4.12 666244

28.58 12.7 7.94 £4.94 £4.12 666245

22 8 7 £3.14 £2.62 666246

28 8 9 £6.44 £5.37 666247

D X C Inc.vat Ex.vat Order No

07_Routing 272_299.indd 299 29/11/2013 11:55

1 2 ... 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

Ryobi ERT2100VK Guide de l'utilisateur Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Ryobi ERT2100VK