Ryobi ERT2100VK Guide de l'utilisateur télécharger pdf (Page 7)

278

Leigh Mortice & Tenon Jigs

axminster.co.uk/signup for our exclusive email offersCall 03332 406406

Mortice & Tenon Jigs

The Super FMT which can produce exactly the same joints as the

original version but at a fraction of the cost. It is supported by all

the same guides and accessories that are available for the FMT

and it has the same capability and capacity. The cost has been

kept low by using steel instead of aluminium in the manufacture

of this model and F clamps. The accuracy and quality have not

been compromised on this very affordable jig and you will be

impressed by the excellent range of joints it produces.

The optional vacuum box

(211377) which, when used

with a suitable extractor, helps

to keep airborne dust to a

minimum in the workshop.

Simplicity is the Key

The Leigh FMT and Super FMT

use just one bit, one guide and

one set-up for every standard

joint. It’s that easy. There are no

bit or guide changes to fuss with and the set-up stays the same

for both parts of the joint. Joint ﬁ t is easily adjusted for perfect

results every time. FMT guides and bits allow you to create any

size mortice and tenon from a tiny 1/16” x 1/8” to a massive 1/2”

x 5”.

Standard Equipment

• Universal sub-base that attaches to virtually any plunge router

• Six standard joint guides 8mm x 15mm , 20mm , 25mm , 30mm

, 35mm , 40mm

• Joint guide stand

• Leigh 170-500 5/16” HSS spiral upcut bit 1/2” shank

Fully adjustable frame for rectangles and squares, use as a guide

for the router. Cut recesses, grooves and slots, suitable for creating

panels, great for making kitchen doors. The kit contains four

lengths of 700mm extrusion with dual metric/imperial scales.

The working area is 600 x 600mm. Frame can be easily adjusted

using the clamp screws. Standard clamps can be used to clamp

to your work piece. Use guide bush with a minimum 8mm spigot

(not supplied). Supplied with anti-tilt shoe, ﬁ xing screws and 4 x

corner brackets.

Varijig Frame System £74.94 £62.45 501663

Inc.vat Ex.vat Code

Trend

Varijig

Adjustable

Frame System

This innovative jig enables

quick and accurate mortice

and tenon joints to be cut

with any router. Variations in

joint width are achieved by

using different guide bush and

cutter combinations, while a two-piece template can be adjusted

to establish the length. The jig is supplied with a setting bar, a set

of plastic guide bushes and full instructions. Rigid construction

and accurate cutter control ensures precise well-ﬁ tting round

ended, square, angle and compound angle, mortice and tenon

joints for chairs, tables and many other applications. Cutters are

required, a 5/8” diameter straight two ﬂ ute cutter for forming

the tenons and the relevant diameter two ﬂ ute cutter equal to

the required mortice width (e.g. a 3/8” cutter for routing a 3/8”

mortice). Standard 60mm ﬂ ange diameter metal guide bushes

can be purchased separately and used as alternatives to the

plastic guide bushes supplied with the jig (not exchangeable).

Mortice & Tenon Jig £209.94 £174.95 610106

Axcaliber Cutter D=1/4” £9.95 £8.29 666123

Axcaliber Cutter D=5/16” £10.44 £8.70 666125

Axcaliber Cutter D=3/8” £10.94 £9.12 666127

Axcaliber Cutter D=1/2” £11.45 £9.54 666131

Axcaliber Cutter D=5/8” £17.45 £14.54 341159

Set of 5 Axcaliber Cutters £54.95 £45.79 718416

Inc.vat Ex.vat Code

Trend Mortice

& Tenon Jig

Clamp not

included

This simple slot cutting jig can be used with any router ﬁ tted with

a 30mm guide bush to cut slots, mortices, etc. It is designed to

be simple to set up and quick to position and secure, particularly

when machining a batch of similar size components. In use, the

router is positioned on the template face with the guide bush

engaged in the slot, ensuring that the cut is both vertical and

accurate in width. N.B. The thickness of the template is 5.75mm

and some guide bushes may need to be modiﬁ ed if too long.

Also included as standard is a cross fence for use when cutting

cross housings etc. Clamp not included.

Slot Cutting Jig £49.94 £41.62 100792

Aluminium Sub-Base £24.95 £20.79 718650

30mm OD Guide Bush £2.75 £2.29 340934

Inc.vat Ex.vat Code

Axminster Slot

Cutting Jig

Leigh FMT Pro

Mortice & Tenon Jig

Angled joints easily

accomplished

Leigh Super FMT Mortice & Tenon Jig

Super Mortice & Tenon Jig - Metric £429.95 £358.29 211376

Optional Vacuum Box £42.44 £35.37 211377

Set of four Square Tenon Guides £59.94 £49.95 474713

Louvre Door Guides (FMT and Super FMT) £39.95 £33.29 475070

Y-Axis Mortice Guide £24.44 £20.37 475611

Additional Clamps for Super FMT £22.25 £18.54 951101

Inc.vat Ex.vat Code

The Leigh FMT Pro is an outstanding product

with superb build quality. No other jig or method

can match the ease, versatility and absolute

precision of this jig. It brings the possibility of

professional quality mortice and tenon joints to any

workshop and any woodworker. Mortice and tenon

joints routed on the FMT are immensely strong and

virtually indestructible. This centuries-old joint is the

thoroughbred of all woodworking joints and is used in ﬁ ne

furniture and cabinetmaking everywhere. Bench mounted,

the FMT jig takes up little room in the workshop and is always

readily available for use with little setting up. Many makes of

router can be ﬁ tted to the Leigh FMT jig using the router’s side

fence rod clamps. This system allows the router to be quickly

ﬁ tted to or removed from the jig, no need for a dedicated router.

N.B.The FMT is available in both imperial and metric versions and

all optional guide sets are compatible with the FMT and Super

FMT models

Features

• Over 70 sizes of mortices and tenons

• Standard joint guides available in 1/4”, (5/16” included with jig),

3/8” and 1/2”

• Maximum 1/2” x 5” joint size

• Double, triple and quadruple joints

• Easily recorded, repeatable joint tightness adjustment

• Angled and compound angled joints

• Works with virtually any plunge router

Standard Equipment (Imperial version)

• Universal sub-base that attaches to virtually any plunge router

• Five 5/16” joint guides (5/16” by 1/2”, 3/4”, 1”, 1.1/4” and 1.1/2”),

which can make over 21 sizes of mortices and tenons

• Joint guide stand

• 5/16” HSS spiral upcut bit with 1/2” shank

• Two cam-action speed clamps

• Adjustable sidestop fence for tenoning

• Two outrigger bars

• Screwdrivers and mounting hardware

• Illustrated user guide

Mortice & Tenon Jig - Metric FMT £899.94 £749.95 100777

Optional Guide Sets - 6, 10 & 12mm £79.94 £66.62 474684

Mortice & Tenon Jig - Imperial £899.94 £749.95 210505

Optional Guide Sets - 1/4”, 3/8” & 1/2” £69.95 £58.29 100782

Inc.vat Ex.vat Code

07_Routing 272_299.indd 278 29/11/2013 11:31

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Ryobi ERT2100VK Guide de l'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Ryobi ERT2100VK